Unconfigured Ad Widget

Collapse

Brass cleaning

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jharry
    Member
    • Apr 2007
    • 257

    Brass cleaning

    Which method seems to work best for you?

    I have Vibratory, Thumbler's Tumbler and Ultrasonic

    They all clean brass - but here is what I have found

    Vibratory - good cleaner, a bit messy/dusty and noisy but long time effective.

    Tumbled - good cleaner, Pins seem to get everywhere including stuck inside the cases, I wind up using a big magnet to collect the loose ones - perhaps my pins are too small? I can't remember the size since I bought them from STS about 5 years ago - are there different sizes that work better than others?

    Ultrasonic - New to this one - I probably should get a good cleaning formula to try it out without having to buy overpriced/pre-made solution

    Thoughts and opinions(like that eon't happen anyway) are apprciated
  • #2
    dezert lobo
    Member
    • Oct 2012
    • 244

    I prefer the vibratory cleaner and have found media with the least amount of dust since I do not want the added costs of paying for water. I do have the RCBS rotary tumbler using the pins but only use it sparingly due to above reason. As mentioned here before and numerous other reloading forums, shiny brass doesn’t guarantee accuracy.
    sigpic

    Live like your dying

    Comment

    • #3
      TAS
      Probationary Member
      CGN Contributor - Lifetime
      • Jun 2009
      • 1280

      Vibratory works best for me. Dust issues can be controlled and the noise is not an issue. For anything else, I would have to add more steps ti my process with little return.
      NRA Life Member

      Comment

      • #4
        tabascoz28
        Veteran Member
        • Mar 2016
        • 3364

        Vibe for me. I tried sonic a few times and realized i hated spending more money. If it guaranteed a perfect clean the first 20 minutes I might have kept it. If it's going to come out like vibe but with drying time and extra deprime step then fuhgetabowdit.

        Comment

        • #5
          pacrat
          I need a LIFE!!
          • May 2014
          • 10287

          I spent the first few decades of reloading with no mechanical cleaning appliances.

          Then got a vibratory. The only drawbacks of which are noise/dust.

          A piece of scrap carpet on the patio solved the noise issue.

          My vibratory has a media separation drum. When done, place a pan under the spout and pull the plug. Vast majority of media dumps into pan, with a little more run time.

          A small amount of media still inside cases is easily dealt with by a few moments of shaking in a 1/4" mesh wire basket, over the pan.

          Any dust is handled by standing upwind of the media dump, and wire basket shake out.

          Definite plus of vibratory, is that the miniscule amount of dust clinging to cases. Acts as lube for carbide pistol dies, and neck expanders of rifle dies.

          Comment

          • #6
            67Cuda
            Senior Member
            • Oct 2013
            • 1727

            Originally posted by jharry
            Which method seems to work best for you?
            Tumbled - good cleaner, Pins seem to get everywhere including stuck inside the cases, I wind up using a big magnet to collect the loose ones - perhaps my pins are too small? I can't remember the size since I bought them from STS about 5 years ago - are there different sizes that work better than others?
            You need this to remove the pins from the brass. No pins stuck anywhere using it.



            Originally posted by ivanimal
            People that call other member stupid get time off.
            So much for being honest.

            Comment

            • #7
              jharry
              Member
              • Apr 2007
              • 257

              Thanks for the feedback

              I do have 2 of the RCBS tumblers - 1 I use for "wet" brass using pins and the other for vibe

              Thanks again!

              Comment

              • #8
                C.G.
                Calguns Addict
                • Oct 2005
                • 8259

                I prefer ultrasonic and use water, vinegar, and a dash of dishwashing liquid, works well enough A guy on 6mmr found the best results with water and Citronox. I haven't tried it yet, I keep forgetting to buy the Citronox. Scroll down the page:

                6mmBR.com is the best guide for 6mm BR Benchrest precision shooting, complete with 6BR FAQ, Reloading Data, Shooter Message Boards, Reader Polls, and Photo Gallery. Match event calendar and rifle competition accuracy training tips. Equipment reviews (.243 bullets, 30BR cartridge, 6mm Norma Improved, gun barrels, powders, primers, gunstocks, dies), accurizing, 1000yd ranges, ballistics, component sales, tools, gunsmiths. Articles archive for reloading, marksmanship, gunsmithing, and varminting.
                sigpic

                Comment

                • #9
                  Divernhunter
                  Calguns Addict
                  • May 2010
                  • 8753

                  I use treated corn cob media and a cut up used dryer sheet with each batch. No dust and clean brass.
                  A 30cal will reach out and touch them. A 50cal will kick their butt.
                  NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
                  SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

                  Comment

                  • #10
                    bergmen
                    Senior Member
                    • May 2011
                    • 2494

                    Have used vibe cleaners for a few decades. Settled on corn cob media (little to no dust) Plus Nu Finish automotive polishing compound. I've used several different types of polishing compounds, settled on Nu Finish.

                    I tried walnut shells once (available at pet stores). Lot cheaper and easier to get than corn cob but very dusty. I've also tried an ultrasonic cleaner, don't like the expense of the cleaning solution and having to dry the brass after cleaning.

                    I will typically start the vibe cleaner in the garage in the evening and hit the sack letting it run all night.

                    Dan

                    Comment

                    • #11
                      SharedShots
                      Senior Member
                      • Feb 2021
                      • 2277

                      Vibe for me.

                      I'm after clean brass not shiny. Like Bregmen I start it in the evening and let it run all night - outside or in the garage. Corn cob media and a bit of lemishine and no dust to worry about. While it does shine up the brass, as long as it's clean I don't care.

                      I tired the pins dry, with liquid and the processing is just another thing I don't want to do. Washing and rinsing brass, they can keep it. Rotary tumblers work but they really are noisy and don't clean any better than vibes in my experience.
                      Let Go of the Status Quo!

                      Don't worry, it will never pass...How in the hell did that pass?

                      Think past your gun, it's the last resort, the first is your brain.

                      Defense is a losing proposition when time is on the side of the opponent. In the history of humanity, no defense has ever won against an enemy with time on their side.

                      Comment

                      • #12
                        Calif Hunter
                        Veteran Member
                        • Aug 2003
                        • 3326

                        I use vibratory cleaning and have for over 50 years. A dryer sheet added when cleaning also helps eliminate dust and collects some of the dirt as well. Adding brass cleaner to the media also helps keep the dust down if the media had been used a lot or was untreated to begin with.

                        Comment

                        • #13
                          bruce381
                          Senior Member
                          • Feb 2009
                          • 2454

                          Originally posted by Calif Hunter
                          I use vibratory cleaning and have for over 50 years. A dryer sheet added when cleaning also helps eliminate dust and collects some of the dirt as well. Adding brass cleaner to the media also helps keep the dust down if the media had been used a lot or was untreated to begin with.
                          yep I do the same works well for me I also like the brass has a small amount of "dry" media works like a die lube and loads slick

                          Comment

                          • #14
                            Cowboy T
                            Calguns Addict
                            • Mar 2010
                            • 5725

                            Vibratory is what I find best for me, because it requires the least amount of actual work on my part. :-) Basically, toss the brass in, turn on the tumbler, walk away, and let 'em go for several hours, or overnight sometimes. Then, walk back, sift 'em, and they're ready to go. I use a 50/50 mix of crushed walnut and treated corn cob.

                            This makes the brass look almost brand-new. Perhaps not quite like 67cuda's brass in the above picture, but awfully close.
                            "San Francisco Liberal With A Gun"
                            F***ing with people's heads, one gun show at a time. Hallelujah!
                            http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
                            http://www.liberalsguncorner.com (podcast)
                            http://www.youtube.com/sfliberal (YouTube channel)
                            ----------------------------------------------------
                            To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

                            Comment

                            • #15
                              Scotty
                              Senior Member
                              • Dec 2005
                              • 2161

                              Wet tumble for 30 minutes, no media. I stopped using my vibratory with corn cob because the wet tumble is better.

                              Comment

                              Working...
                              UA-8071174-1