Just ordered some things from Armanov.....

[mtenenhaus]

Years ago i purchase a Dillon 650XL....it's remained in the original shipping box unopened forever. My friends wanted to know if they should bury me with it unopened.....so i figure that subtle hint means it's probably time to unbox and assemble it. Lord have mercy on my soul.

I read about some upgrades/accessories from Armanov and figured it's probably best to secure them in advance.....why do i need them? Who knows but what the heck.

Anyway, this company must send me tracking information (on the package from Slovenia) at least 3 times per day.......a bit overwhelming but pretty cool at the same time.

Wish me luck.

I ordered the Case Feed Stop, a Stop Ramp, Primer Stop Switch, Quick Disconnect for Dillon powder measure, a few Free-Float Lock Rings and a couple of ToolHead Free-Float, Zero-Play for Dillon XL650 - XL750. Once upon a time i had also purchased from eBay a shell plate bearing kit, some sort of rod with a bearing on it (can't recall the name) and a powder measure knob.

[tabascoz28]

It would be cool to hear how it works another few years down the line when you get the time to put it all together. Ha ha

[mtenenhaus]

thanks....i'm curious as well.

so i just received the package today...6 days to get from Slovenia to California...pretty cool

[tabascoz28]

It is amazing. I recently had some special.22 pellets delivered from the Czech Republic, around a week too.

[MarikinaMan]

I have the Armanov swager assembly for the 650.

Works good

[Raiderh20boy]

I think there is a US distributor. They have some really good stuff. Also a seller on EBay with really good 650/750 upgrades is a seller Snowshoes I think he’s from Alaska.

[sirgrumps]

[bruce381]

I would setup and get the 650 running stock before adding "do dads"

Some of that stuff is not needed and can need have a learning curve you do not need when getting a 650 running smooth.

[BrassCase]

They sell Armanov on Amazon and E-bay.

[9mmepiphany]

Wish me luck.

I ordered the Case Feed Stop, a Stop Ramp, Primer Stop Switch, Quick Disconnect for Dillon powder measure, a few Free-Float Lock Rings and a couple of ToolHead Free-Float, Zero-Play for Dillon XL650 - XL750.

The Case Feed Stop is unbelievably useful for changing settings when setting up your dies...I have a friends 750 on the bench next to my Hornady LNL

The Quick Disconnect for the powder measure is a huge time saver when emptying your powder after each session.

Once upon a time i had also purchased from eBay a shell plate bearing kit, some sort of rod with a bearing on it (can't recall the name) and a powder measure knob.

This is also useful as it makes the whole press run smoother and saves wear on the ramp.

Another useful accessory they offer is the click dial to adjust the powder drop. They also offer a Case Gauge block...if you don't already have the Hundro...which comes with a flipper cover to more easily transfer your reloaded cartridges into boxes

[mtenenhaus]

thank you, hope you're well
i'll look that up