Unconfigured Ad Widget

Collapse

scale recommendation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    FluorideInMyWater
    Senior Member
    • May 2006
    • 1840

    Originally posted by ar15barrels
    Since your primary use will probably be just checking the charge weight adjustment when you are setting up the press, this is all you probably need:



    That has enough capacity to weigh the heaviest bullet you are likely to ever load on your presses and lots of accuracy to weigh a single charge.

    When you are setting up charge weights, I recommend weighing 5 sequential charges so you get a more accurate picture of what your charges really are because a single charge can run higher or lower than average and if you are only checking a single charge, you are not getting an accurate reading of what you are really doing.
    this is intersting. so is this +/- .1g? or .01g? seems that most scales are +/- .1g if this one is .01g that would be fabulous, considering the price and that i'm just checking loads.
    No longer FluorideInMyWater. (California)
    now the infamous "CalciumDepositsInMyWater" (Cancun)

    Comment

    • #17
      ar15barrels
      I need a LIFE!!
      • Jan 2006
      • 57202

      Originally posted by FluorideInMyWater
      this is intersting. so is this +/- .1g? or .01g? seems that most scales are +/- .1g if this one is .01g that would be fabulous, considering the price and that i'm just checking loads.
      The accuracy is 0.0145 grains on the scale I recommended.
      About 7x more accurate than a 0.1 grain scale.
      Randall Rausch

      AR work: www.ar15barrels.com
      Handguns: www.handgunbarrels.com
      Bolt actions: www.700barrels.com
      Foreign Semi Autos: www.akbarrels.com
      Most work done while you wait on a scheduled shop visit.

      Comment

      • #18
        FluorideInMyWater
        Senior Member
        • May 2006
        • 1840

        Originally posted by ar15barrels
        The accuracy is 0.0145 grains on the scale I recommended.
        About 7x more accurate than a 0.1 grain scale.
        yeah, i was a bit confused until i found a conversion calculator from grams to grains......and was shocked that it is 10 times more accurate and for only $40. so what is the catch???? poor quality? short life-span? had to believe that something like that would only be $40............... :0

        so what would the advantage be for purchasing the A&D Newton EJ-123 High Precision Portable Scale
        https://www.oldwillknottscales.com/a...on-ej-123.html what does it do the the the above one doesn't?

        or the double alpha Max Capacity: https://www.doublealpha.biz/us/daa-s...eloading-scale for $99
        Last edited by FluorideInMyWater; 09-12-2021, 9:14 PM.
        No longer FluorideInMyWater. (California)
        now the infamous "CalciumDepositsInMyWater" (Cancun)

        Comment

        • #19
          ar15barrels
          I need a LIFE!!
          • Jan 2006
          • 57202

          Originally posted by FluorideInMyWater
          yeah, i was a bit confused until i found a conversion calculator from grams to grains......and was shocked that it is 10 times more accurate and for only $40. so what is the catch???? poor quality? short life-span? had to believe that something like that would only be $40............... :0

          so what would the advantage be for purchasing the A&D Newton EJ-123 High Precision Portable Scale
          https://www.oldwillknottscales.com/a...on-ej-123.html what does it do the the the above one doesn't?

          or the double alpha Max Capacity: https://www.doublealpha.biz/us/daa-s...eloading-scale for $99
          The more expensive scales are usually faster to give a reading.
          This is because they have more processing power and take readings faster and average them together before spitting out the weight.

          This is more important if you are weighing every charge as you are charging cases.
          As an example, I have an older (1990's) Denver instrument scale that reads to 0.0001 gram, but it takes like 2-3 seconds to get a stable measurement.
          The newer scales that will measure that accurately are much faster.
          Any scale in that accuracy range is going to have a wind shield that you have to open/close in order to get an accurate reading as the wind on your bench or even your breathing effects the measurement so it already takes more time to open/close the wind shield for each charge so any extra time waiting for the electronics really adds time to your measuring.

          In your application, it won't matter if it takes an extra second for a stable measurement.
          The $99 scale you linked above is probably the same electronics package as the $40 scale I linked because all the specs are the same.
          The $350 scale you linked has more total weight capacity and probably similar electronics to a gem-pro class scale but it's 3.5x as expensive as the cheaper scales so it had better be faster/better to justify it's price.
          Randall Rausch

          AR work: www.ar15barrels.com
          Handguns: www.handgunbarrels.com
          Bolt actions: www.700barrels.com
          Foreign Semi Autos: www.akbarrels.com
          Most work done while you wait on a scheduled shop visit.

          Comment

          • #20
            sigstroker
            I need a LIFE!!
            • Jan 2009
            • 19993

            Originally posted by triggs75
            If that is what you are looking for then go for a Dillon D-Terminator or a CED Pro scale. Or even the Double Aphla DAA scale.

            All 3 in stock at Double alpha here



            Chad
            I got a Dillon by that name when they first came out. Mine doesn't have that lid though, wish it did. Otherwise been happy with it.

            Comment

            • #21
              FluorideInMyWater
              Senior Member
              • May 2006
              • 1840

              Originally posted by ar15barrels
              The more expensive scales are usually faster to give a reading.
              This is because they have more processing power and take readings faster and average them together before spitting out the weight.

              This is more important if you are weighing every charge as you are charging cases.
              As an example, I have an older (1990's) Denver instrument scale that reads to 0.0001 gram, but it takes like 2-3 seconds to get a stable measurement.
              The newer scales that will measure that accurately are much faster.
              Any scale in that accuracy range is going to have a wind shield that you have to open/close in order to get an accurate reading as the wind on your bench or even your breathing effects the measurement so it already takes more time to open/close the wind shield for each charge so any extra time waiting for the electronics really adds time to your measuring.

              In your application, it won't matter if it takes an extra second for a stable measurement.
              The $99 scale you linked above is probably the same electronics package as the $40 scale I linked because all the specs are the same.
              The $350 scale you linked has more total weight capacity and probably similar electronics to a gem-pro class scale but it's 3.5x as expensive as the cheaper scales so it had better be faster/better to justify it's price.
              that makes sense
              the heaviest load that i would put out probably would be 30-06. to me, that is a large round, but i don't know how that compares in weight to a .338 lapua or a 6.5, or .308
              No longer FluorideInMyWater. (California)
              now the infamous "CalciumDepositsInMyWater" (Cancun)

              Comment

              • #22
                ar15barrels
                I need a LIFE!!
                • Jan 2006
                • 57202

                Originally posted by FluorideInMyWater
                that makes sense
                the heaviest load that i would put out probably would be 30-06. to me, that is a large round, but i don't know how that compares in weight to a .338 lapua or a 6.5, or .308
                338 lapua is bigger than 30-06.

                A max 338 lapua load is going to be around 6.5 grams which is nowhere near the scale capacity of 50 grams.

                Unless you start sorting tennis balls by weight, the 50 gram scale will be fine.
                Golf balls are under 50 grams so you can sort golf balls as well as ANY bullet you would load up through 338 Lapua or 458 magnum.
                Randall Rausch

                AR work: www.ar15barrels.com
                Handguns: www.handgunbarrels.com
                Bolt actions: www.700barrels.com
                Foreign Semi Autos: www.akbarrels.com
                Most work done while you wait on a scheduled shop visit.

                Comment

                • #23
                  FluorideInMyWater
                  Senior Member
                  • May 2006
                  • 1840

                  Originally posted by FluorideInMyWater
                  that makes sense
                  the heaviest load that i would put out probably would be 30-06. to me, that is a large round, but i don't know how that compares in weight to a .338 lapua or a 6.5, or .308
                  LOL. YEAH, not tennis balls. just baseballs
                  No longer FluorideInMyWater. (California)
                  now the infamous "CalciumDepositsInMyWater" (Cancun)

                  Comment

                  Working...
                  UA-8071174-1