need to size?

[captn-tin]

Came upon about 250 rnds of 9mm already sized, primed and belled. Can I, on my Dillon 550B just start the finishing process at the charging station with no round in the sizing station? Alignment problems or anything like that? Thanks in advance.

[alland]

Yes, insert a case and then advance the shell plate. Pull handle, insert a case and rotate.

[bubbala]

I might remove the first die/size decap, /and proceed as usual.

[the86d]

If a dummy round with a bullet fits during the plunk test, screw-it...
load 'em up.

[ar15barrels]

Came upon about 250 rnds of 9mm already sized, primed and belled. Can I, on my Dillon 550B just start the finishing process at the charging station with no round in the sizing station? Alignment problems or anything like that? Thanks in advance.

Remove the sizing die and empty your primer tube.
Load as usual.

It's WAY easier than trying to put cases in at a different station.