Unconfigured Ad Widget

Collapse

Hand Primer Tools

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • goglesby3
    Member
    • Dec 2016
    • 113

    Hand Primer Tools

    Thoughts on the Sinclair Hand Primer (or others you use)...
  • #2
    Bastard
    • Jul 2009
    • 2209

    I have a couple of the RCBS hand priming tools and compared to all the others ones out there they all suck including the RCBS... they may be a Lee one that is ok but I can't remember for sure.

    don't get me wrong they all work as described at least the 2 RCBS ones I have, I haven't tried the others... the issue I have is the design of them - clench your fist 4 or 5 hundred times and you'll see what I mean.

    years back I switched the RCBS bench mounted strip primer & absolutely love it, while not without it's own quirks it is so much easier to use when trying to prime any volume of cases

    Comment

    • #3
      goglesby3
      Member
      • Dec 2016
      • 113

      Just getting started and am planning to only load a 100 rds. of 30-06 at a time, then maybe some 308. Just fine tuning my hunting rifle ammo, want to do the best job and be frugal, some times that's a fine line..

      Comment

      • #4
        dieselnut
        Junior Member
        • Jan 2014
        • 97

        I use the hornady hand primer. I started on the rcbs rock chucker primer and quickly threw that priming arm out. Not sure about other hand primers but the hornady one has both a large and small priming ram and fits both remington and hornady style shell holders.



        Sent from my SM-G960U1 using Tapatalk

        Comment

        • #5
          Sailormilan2
          Veteran Member
          • Nov 2006
          • 3496

          I have a Hornady LNL progressive press, which primes cases as part of the loading procedure. I've recently gone back to my old(very old) Lee handpriming tool, which I find works better, with fewer problems.

          Comment

          • #6
            vaka
            Senior Member
            • Jan 2013
            • 977


            I bought this hand primer by frankford arsenal and its built really well . i also bought their universal bullet seater also built very well . The hand primer is heavy and feels solid .
            Old problems are like dry poop, if you let the dry poop sit it doesn't smell but the minute you decide to stir the poop with a stick, the smell comes back. Moral of the story, Don't bring up old problems!

            Comment

            • #7
              golfish
              I need a LIFE!!
              • Mar 2013
              • 10129

              I like the RCBS hand primer. It take s little getting used to but I have very few problems with it. There's not a lot that go wrong with it.
              It takes a lot of balls to play golf the way I do.
              Happiness is a warm gun.

              MLC, First 3

              Comment

              • #8
                CSACANNONEER
                CGN/CGSSA Contributor - Lifetime
                CGN Contributor - Lifetime
                • Dec 2006
                • 44094

                I actually like the old style Lee hand primers. The ones with a tray not the early ones. I've picked a few of them up used, for $2-$5 a piece. Seating primers by hand is great once you develop a feel for what they are supposed to feel like. I also prime with progressive presses and, for 50BMG, I have a M2 primer seater.
                NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
                California DOJ Certified Fingerprint Roller
                Ventura County approved CCW Instructor
                Utah CCW Instructor


                Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

                sigpic
                CCW SAFE MEMBERSHIPS HERE

                KM6WLV

                Comment

                • #9
                  bumpo628
                  Senior Member
                  • Nov 2009
                  • 1142

                  The old Lee hand primers with the round trays are pretty good. The XR with the square tray is a bit more difficult. It helps to use two hands to reduce the force. Just push your hands together instead of trying to do it one handed.
                  Ronald Reagan once said that the most terrifying words in the English language are: "I'm from the government and I'm here to help".
                  Download my alloy calculator here: http://castboolits.gunloads.com/showthread.php?t=105952

                  Comment

                  • #10
                    ar15barrels
                    I need a LIFE!!
                    • Jan 2006
                    • 57202

                    I use the RCBS hand primer.
                    Everything Sinclair makes is great quality, but their priming tool does not have a tray on the side so it's much slower than the RCBS.
                    With an RCBS, you load 100 primers into the tray and then prime cases.
                    With the Sinclair, you have to set a primer into the tool before each case.
                    That's a lot more manipulation per primed case.
                    Randall Rausch

                    AR work: www.ar15barrels.com
                    Handguns: www.handgunbarrels.com
                    Bolt actions: www.700barrels.com
                    Foreign Semi Autos: www.akbarrels.com
                    Most work done while you wait on a scheduled shop visit.

                    Comment

                    • #11
                      Corbin Dallas
                      CGN/CGSSA Contributor - Lifetime
                      CGN Contributor - Lifetime
                      • May 2006
                      • 6461

                      This is THE best hand primer system on the market.

                      Hands down.


                      The Perfect Seat Hand Primer seating tool works with both small and large primers and its sel-righting primer trays holds 100+ primers
                      NRA Life Member and Certified Instructor: Pistol - Rifle - Shotgun - PPITH - PPOTH - NRA Certified RSO

                      WTB the following - in San Diego
                      --Steyr M357A1 357SIG
                      --Five Seven IOM (round trigger guard)

                      Never forget - השואה... לעולם לא עוד.

                      Comment

                      • #12
                        Shab21
                        Member
                        • Apr 2013
                        • 291

                        Comment

                        • #13
                          Zeo
                          Member
                          • Feb 2017
                          • 153

                          +2 for Frankford Arsenal. Works great.

                          Comment

                          • #14
                            divingin
                            Veteran Member
                            • Jul 2015
                            • 2522

                            Originally posted by goglesby3
                            Just getting started and am planning to only load a 100 rds. of 30-06 at a time, then maybe some 308. Just fine tuning my hunting rifle ammo, want to do the best job and be frugal, some times that's a fine line..
                            I typically prime 50-100 cases at a time. Occasionally I'll do 200 in a sitting. I use the RCBS Universal hand primer; 50 or a 100 is not a problem; 200 can get tiring. A 5 or 10 minute break makes it pretty easy. I figure it's good grip strength exercise anyway.

                            One of these days, I'll spring for one of the bench mounted lever actuated RCBS units (maybe.) I don't like the idea of having to individually handle each primer.

                            Comment

                            • #15
                              RandyD
                              Calguns Addict
                              • Jan 2009
                              • 6673

                              I have the Sinclair priming tool. It is a well engineered and quality piece of equipment. As AR15 Barrels commented it does not have a tray. That is by design. It is intended to prime one case at a time and to do it as close to perfect as can be. It is really a priming tool for precision shooters who do shoot for accuracy and their round count is low.

                              I use a 21st Century Priming tool for priming a large number of cases. It is also a well engineered and quality piece of equipment. They took the idea of the Lee Priming Tool which is made of pot metal and plastic and constructed a tool of all machined steel.

                              If you enjoy solid, well engineered, last a lifetime tools, then buy either or both other above.
                              sigpic

                              Comment

                              Working...
                              UA-8071174-1