300 PRC load data

[tyler_sti]

So who's shooting 300 PRC and what's working for you? So far I have been able to get ahold of Federal 215's, factory (isht) hornaday brass, and some IMR 7828 SSC to get a load started.

Brass:
Primer:
Powder:
Charge weight:
Bullets type/weight:
COAL:
Barrel length:
Barrel twist
Groupings/distance:

[LynnJr]

Hornady brass Fed 215 primer 78 grains of H1000 powder 210 Berger VLD seated at 3.700 inches runs 2850 fps and 3/4 inch with ease.
Step it up to 81.5 grains and 2945fps and it's sub half inch.
Work up from 78 grains in half grain increments.

[tyler_sti]

Hornady brass Fed 215 primer 78 grains of H1000 powder 210 Berger VLD seated at 3.700 inches runs 2850 fps and 3/4 inch with ease.
Step it up to 81.5 grains and 2945fps and it's sub half inch.
Work up from 78 grains in half grain increments.

Appreciate the load donation! After I get some H1000 all give it a whirl. Just loaded up a 50ct ladder last night for next range day. Starting off with some berger 220gr hpbt and the IMR 7828 SSC, 67.6gr starting load ending at 73gr...3.575" COL...(will play with seating depth after I get the velocity I want)

[sigguy552]

In case you haven’t figured it out, h1000 is fairy dust right now

[tyler_sti]

Shiit, tell me about it. That's why I settled for the IMR. Really have to grab what you can at the moment, sucks.