Swager recommendation

[Toddzilla]

Looking to process by 223/556 and 9mm brass. I have a Dillon 650 and 750.

Considering the Swage-it for either or both 650/750. I know it may void warranty so also considering manual Swagers.

1. Dillon super swage
2. Frankford Arsenal platinum series primer pocket swager (new version with stronger internals). This looks like a good option mounted to a desk where the swage rod automatically ejects.

Thoughts?

[Colt562]

[Dirtlaw]

I've been thinking about this lately. I am looking at a different approach. And I do not intend to involve a press. In part you are dealing with the military crimp???

[Dirtlaw]

Another consideration, although not earth-shaking, is the proper dimension for the flash hole.

[Divernhunter]

Dillon. I like mine and I have tried many others.

[TexasJackKin]

I just ordered the CH4D, looks like a better mouse trap to me....

[Dooder]

1050 or 1100
The time it saved in my life is worth it, no question about it.
How many hours does it take to swage a 5 gallon of cases? Imagine gaining that back in your life. Thats my lesson in loading and life.

Sent from my moto g(7) power using Tapatalk

[Dirtlaw]

Interesting thread! Must free myself from the firefight! But good luck with that!

[Dooder]

Yea. I made my comment, I've participated in too many of these types of topics and know better than to hang around haaha

Sent from my moto g(7) power using Tapatalk

[baih777]

Pickup a set of these guages.

https://ballistictools.com/store/reloading-products/small-and-large-primer-pocket-gauges

OS right now. I think Brownells might have them.

I use the RCBS swagger that works with single stage press.
Just have to put a drop of oil on the pin every 10 cases or it starts to stick.
I get about 90% that passes the guage. The 10% I use a Lyman primer pocket reamer chucked in a drill.
If they still don't pass the guage. Goes in the recycling bucket.

[balmo]

Lee APP. The fastest swager around, sans 1050