Unconfigured Ad Widget

Collapse

IMR4198 in 223

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • croue
    Senior Member
    • Jan 2013
    • 1255

    IMR4198 in 223

  • #2
    jsanch03
    Senior Member
    • Nov 2018
    • 922

    Comment

    • #3
      ironhorse1
      Senior Member
      • Nov 2012
      • 1005

      OP How many grains of IMR 4198 are you using?

      The Hodgdon data does not seem realistic based on my tests.

      In a Mini 14 22 grains of IMR 4198 chronographs at 3000 fps with a 55 grain Remington FMJ BT bullet. A very reliable and accurate load.

      I've been shooting that load for forty plus years.

      At the same time the above load was tested I also tried PMC 5.56 that chronographed at 3200 fps.

      I have always believed that Hodgdon load data was very conservative.

      Every manual that I own has data well above anything that Hodgdon provides. BTW note that the load from Hodgdon was shot in a 24" barrel.

      YMMV
      Last edited by ironhorse1; 07-27-2020, 7:29 AM.

      Comment

      • #4
        superhondaz50
        Veteran Member
        • Feb 2006
        • 3108

        I run 20gr of IMR4198 with a 55gr. My dad loads 22gr compressed, he's been using that load at least 40 years.
        Originally Posted By CTbuilder1 @ arfcom:
        A lot of time and energy goes into thinking up ways to make perfectly good rifles into something dumb. Single shot ARs are gay. AR pistols are also gay. Just my opinion, of course, but a single shot AR pistol would be an AIDS cannon.

        Comment

        • #5
          croue
          Senior Member
          • Jan 2013
          • 1255

          Comment

          • #6
            croue
            Senior Member
            • Jan 2013
            • 1255

            Originally posted by ironhorse1
            OP How many grains of IMR 4198 are you using?

            The Hodgdon data does not seem realistic based on my tests.

            In a Mini 14 22 grains of IMR 4198 chronographs at 3000 fps with a 55 grain Remington FMJ BT bullet. A very reliable and accurate load.

            I've been shooting that load for forty plus years.

            At the same time the above load was tested I also tried PMC 5.56 that chronographed at 3200 fps.

            I have always believed that Hodgdon load data was very conservative.

            Every manual that I own has data well above anything that Hodgdon provides. BTW note that the load from Hodgdon was shot in a 24" barrel.

            YMMV

            I agree on the hodgdon data in general. Seems conservative. Especially with some 270 loads I tried this weekend. I was significantly over their data max for IMR4831 and the velocities were just starting to tighten up. They also may have been flattening out so not wanting to push much higher as diminishing returns usually signals higher pressures. May try a half grain on either side of the best result and explore the grains/velocity curve a bit more while being careful.


            Sent from my iPhone using Tapatalk

            Comment

            • #7
              ironhorse1
              Senior Member
              • Nov 2012
              • 1005

              Just keep going until you get the best load. BTW I even use 22 grains with 60 grain Sierra soft points. Still a good load.

              irh

              Comment

              Working...
              UA-8071174-1