Unconfigured Ad Widget

Collapse

5.56 question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Clickjack
    Senior Member
    • Jan 2019
    • 515

    5.56 question

  • #2
    baih777
    CGN/CGSSA Contributor
    CGN Contributor
    • Jul 2011
    • 5680

    If your reloading. Why clone a round.
    Develop your own recipe for your gun for the best accuracy.
    I usually use the powders in the book that give fastest fps.
    I use Benchmark a lot. It's not the fastest but meters good.
    Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
    I really miss the good old Pomona Gun Shows.
    I'm Back.

    Comment

    • #3
      baih777
      CGN/CGSSA Contributor
      CGN Contributor
      • Jul 2011
      • 5680

      You can also choose 68 or 69 g. 73g or 75 g.
      I use Hornady 68g hpbt and 75g ELD. In my Ruger RPR 556. Worked great. Till the rifle took a crap.
      Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
      I really miss the good old Pomona Gun Shows.
      I'm Back.

      Comment

      • #4
        highpower790
        Veteran Member
        • Jun 2013
        • 3481

        223/556 is easy!pick a med burn rate powder and a match bullet,a mediocre powder charge will get you 2700fps.i load up to 2800fps without issue.
        Keep it simple!

        Comment

        • #5
          Clickjack
          Senior Member
          • Jan 2019
          • 515

          My rifle has a 556 chamber. Are you guys seeming better performance from 556 brass? It Seems like a hassle to find 556 brass that’s boxer primed (If you have a good source post it)

          Comment

          • #6
            highpower790
            Veteran Member
            • Jun 2013
            • 3481

            Brass brand won’t matter in a service type rifle,expect 4-6 reloads .wolf primed brass ,from reviews on national match.com gets 3-4 reloads and sells for roughly $140k.
            Keep it simple!

            Comment

            • #7
              23's Dad
              Senior Member
              • Jun 2010
              • 502

              Mk 262 mod 1 is good stuff. But it runs on the ragged edge of high pressure for most rifles. I've picked up a TON of Mk 262 brass at the Navy Matches and there are ejector swipes and smears from most of the shooters. When shooting Mk 262 I use a FA BCG and the Tubb CWS. I don't get swipes and smears with this setup, but it is still very firm recoiling (for 5.56).

              I don't think that knucklehead with the lengthy youtube series had much of a clue at all. Blackhills is a clone of the Mk 262 mod 1 that comes out of Crane ID.

              What are you trying to do with your round, go fast or group well? If you really want good groups, there are many well known combinations of powder and match bullets that just work. For me, the closest reload that I've had good results with AND felt like Mk 262 Mod 1, is a 77gr SMK over AA2520 loaded to the upper end of the Accurate Arms 5.56 reloading data. It will cost you brass life. Keep and eye on your primer pockets and make sure you have a heavy BCG system or Buffer.

              Best of Luck!

              Comment

              • #8
                Clickjack
                Senior Member
                • Jan 2019
                • 515

                Originally posted by 23's Dad

                What are you trying to do with your round, go fast or group well? !

                Comment

                • #9
                  scotty99
                  Senior Member
                  • Dec 2009
                  • 1184

                  Comment

                  • #10
                    Clickjack
                    Senior Member
                    • Jan 2019
                    • 515

                    Comment

                    • #11
                      highpower790
                      Veteran Member
                      • Jun 2013
                      • 3481

                      How long is the barrel?
                      Keep it simple!

                      Comment

                      • #12
                        Clickjack
                        Senior Member
                        • Jan 2019
                        • 515

                        14.5 ( comp makes 16).

                        Comment

                        • #13
                          highpower790
                          Veteran Member
                          • Jun 2013
                          • 3481

                          Originally posted by Clickjack
                          14.5 ( comp makes 16).
                          Every inch of barrel length is worth30-40fps,so from my 2800fps with a hornady 75,op should have velocity 200fps less.Taking shots with anything less than 73-77gr bullet is a waste of time in my opinion.Sure a 68/69 bullet will go the distance,whatever that is right now,but a heavier bullet will be more efficient.
                          Keep it simple!

                          Comment

                          • #14
                            Clickjack
                            Senior Member
                            • Jan 2019
                            • 515

                            Lee just offers a FL resize 223 die set.
                            Rcbs offers a small base and some other type of 223 set.

                            Obviously I’m using a semi-auto. Do I need a small base set to help with feeding? Does it matter?

                            Comment

                            • #15
                              highpower790
                              Veteran Member
                              • Jun 2013
                              • 3481

                              Unless you are using a match barrel with a tight chamber a small base is pointless.
                              Keep it simple!

                              Comment

                              Working...
                              UA-8071174-1