Unconfigured Ad Widget

Collapse

Shooting bench table question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • skyline
    Senior Member
    • Mar 2012
    • 500

    Shooting bench table question

    Hello everyone I don't know if this is the correct place for this question
    I am going to buld a shooting table that can accommodate 2 shooters and would like to know what is the correct height I have shot locally at angels shooting range and they seem a little low I feel I'm always hunched over
    Thank you guys for your suggestions in advance

    Sent from my SM-N976V using Tapatalk
  • #2
    sofbak
    Veteran Member
    • Aug 2010
    • 2628

    "a shooting table that can accommodate 2 shooters" is (from my experience) a bad idea if it is used as a shooting rest for two.

    While one is shooting, the other may be doing something else-loading, unloading, whatever. And the activity will shake the table enough to keep each other "off POA." And recoil of one shooter's shot will certainly jarr the table for the other shooter's aim/shot.
    Tire kickers gonna kick,
    Nose pickers gonna pick
    I and others know the real

    Comment

    • #3
      divingin
      Veteran Member
      • Jul 2015
      • 2522

      Originally posted by skyline
      I have shot locally at angels shooting range and they seem a little low I feel I'm always hunched over
      Is it the bench or the seat that is the wrong height?

      And I agree with Sofbak; two shooters on a bench is not ideal.

      Comment

      • #4
        skyline
        Senior Member
        • Mar 2012
        • 500

        Thank you for that info I never thought of that so looks like I will have to buld to separate tables my question was on the table height

        Sent from my SM-N976V using Tapatalk

        Comment

        • #5
          sofbak
          Veteran Member
          • Aug 2010
          • 2628

          Bench height is relative to seat height.
          Which is relative to the shooter's height, and his "comfort zone."
          Typically when sitting, you want your hips at least as high as your knees or a couple of inches higher than your knees, with both feet flat on the floor.
          So start there and work your way up with a tape measure to your elbow height in shooting position.
          Or google shooting bench plans and see what height range comes up.
          Tire kickers gonna kick,
          Nose pickers gonna pick
          I and others know the real

          Comment

          • #6
            RandyD
            Calguns Addict
            • Jan 2009
            • 6673

            Two shooters on the same table, is not the way to go. As far as the height of the table, the stool has to be a height to accommodate the shooter. I bought a used drummer's stool for $15 off craigslist, it is adjustable for height, so with this stool, I can adjust it to shoot off multiple height shooting tables.
            sigpic

            Comment

            • #7
              edgerly779
              CGN/CGSSA Contributor
              CGN Contributor
              • Aug 2009
              • 19871

              do not make a bench rest for 2. separate tables.

              Comment

              • #8
                baih777
                CGN/CGSSA Contributor
                CGN Contributor
                • Jul 2011
                • 5680

                That's why you see people at Angeles with their own chair (stool)
                Right now I am making my own riser to put my front rest on so I don't have to lean down so far to shoot.
                Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
                I really miss the good old Pomona Gun Shows.
                I'm Back.

                Comment

                • #9
                  LynnJr
                  Calguns Addict
                  • Jan 2013
                  • 7959

                  32-34 inches.
                  Lynn Dragoman, Jr.
                  Southwest Regional Director
                  Unlimited Range Shooters Association (URSA)
                  www.unlimitedrange.org
                  Not a commercial business.
                  URSA - Competition starts at 2000 yards!

                  Comment

                  • #10
                    CamW
                    Senior Member
                    • Oct 2005
                    • 1722

                    I used these legs to build my shooting bench. I used the 34" height.

                    Comment

                    • #11
                      Lead Waster
                      I need a LIFE!!
                      • Sep 2010
                      • 16650

                      I would sit at my kitchen table and see how it feels to get a baseline, then move up or down from there as you see fit.

                      As someone mentioned, typical workbench height is around 32 inches, but ideally it would be sized to fit the actual person using it.
                      ==================

                      sigpic


                      Remember to dial 1 before 911.

                      Forget about stopping power. If you can't hit it, you can't stop it.

                      There. Are. Four. Lights!

                      Comment

                      • #12
                        sonofeugene
                        Veteran Member
                        • Oct 2013
                        • 4759

                        Originally posted by sofbak
                        Bench height is relative to seat height.
                        Which is relative to the shooter's height, and his "comfort zone."
                        Typically when sitting, you want your hips at least as high as your knees or a couple of inches higher than your knees, with both feet flat on the floor.
                        So start there and work your way up with a tape measure to your elbow height in shooting position.
                        Or google shooting bench plans and see what height range comes up.
                        This. Start with the seat height. Get that comfortable first. Then the table.
                        Let us not pray to be sheltered from dangers but to be fearless when facing them. - Rabindranath Tagore

                        A mind all logic is like a knife all blade. It makes the hand bleed that uses it. - Rabindranath Tagore

                        Talent hits a target no one else can hit. Genius hits a target no one else can see. - Arthur Schopenhaur

                        Comment

                        • #13
                          skyline
                          Senior Member
                          • Mar 2012
                          • 500

                          Thank you guys I like the idea of sitting at my table and starting from there

                          Sent from my SM-N976V using Tapatalk

                          Comment

                          Working...
                          UA-8071174-1