Most ergonomic handle on reloading hand tools

[alpha_romeo_XV]

I don't how I ended up with such a variety of different brand/design handles for my case prep tools but I found that one design works best for me. The threads/shafts are universal so changing heads is easy to swap to the one I like. Some require too much wrist motion, so I like the knurled aluminum handle that just uses a finger twist motion. The weight, texture and diameter of the aluminum handle is the winner for me. When you're prepping a lot of cases a small ergo advantage makes a difference. I looked into those motor driven case prep devices but did not like the reviews about them. Unless I get arthritis I'm sticking with the hand prep tools.

[GunNut1980]

I used the Lee Zip trim for years trimming my rifle brass and the deburring with the little Lee tool. My fingers would fatigue from loosening the chuck on the brass. The wooden handle was never hard on me. I have since upgraded to an RCBS Trim Pro 2 powered trimmer with the 3-way cutters and a Lyman Case Prep Xpress and I will never go back to the manual method.

[baih777]

I use this.

https://shop.brownells.com/reloading/case-preparation/case-prep-units/lock-n-load-case-prep-trio-sku100010331-53967-104229.aspx?cm_mmc=PPC-_-Itwine-_-Google-_-100-010-331&gclid=CjwKCAjw8NfrBRA7EiwAfiVJpb2Wl0Q2bpPu7IJoP_acJK7NDOPxo4L_TAbDrnYEjIbA0kh6VSKAgxoCypMQAvD_BwE

The tips are the same thread.

[JackEllis]

I tried using the Lee case trimmer that sits in my press and was not happy with it. Same with hand tools Now I'm much happier with an RCBS case trimmer and a Lyman prep center.

[pennstater]

I use this.

https://shop.brownells.com/reloading/case-preparation/case-prep-units/lock-n-load-case-prep-trio-sku100010331-53967-104229.aspx?cm_mmc=PPC-_-Itwine-_-Google-_-100-010-331&gclid=CjwKCAjw8NfrBRA7EiwAfiVJpb2Wl0Q2bpPu7IJoP_acJK7NDOPxo4L_TAbDrnYEjIbA0kh6VSKAgxoCypMQAvD_BwE

The tips are the same thread.

Wow! That baby looks like it should be on a rocket sled.
Bet it works tho.