Unconfigured Ad Widget

Collapse

Identifying Miscellaneous Shell Holders

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
  • #17
    divingin
    Veteran Member
    • Jul 2015
    • 2522

    Originally posted by pacrat
    Based on reviewing the several dozen I have on hand.

    RCBS, are stamped with their name, either on top, or frnt circumference.

    Lyman, are all name stamped on frnt circumference.

    Redding, not stamped with name. But are all "knurled" around circumference.

    Lee, not marked in any way other than the number.
    I'd have to double check,. but I'm pretty sure my Hornady's are stamped on the rear of the deck (opposite the case insertion opening - similar to the third shell holder in OP's pic.) Mine, however, are a satin non-blued finish, similar to the 2nd in the pic.

    Comment

    • #18
      fguffey
      Senior Member
      • Mar 2010
      • 1408

      And then there is the deck height. My shell holders have a deck height of .125"; my shell holders that do not have a deck height of .125" are special shell holders.

      In the 60s C&H of El Monte, California sold dies in fiber boxes that were designed for counter display. MY C&H dies with the fiber box have the instructions of the bottom of the box. Fiber boxes do not last long; the instructions on the bottom of the fiber box suggested the dies in the box should be used with shell holders with a height of .125".

      F. Guffey

      Comment

      Working...
      UA-8071174-1