Unconfigured Ad Widget

Collapse

223/H335/40gr V-Max Load

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • WartHog
    Veteran Member
    • Jan 2012
    • 4639

    223/H335/40gr V-Max Load

    Looking to have some 40gr V-Max loaded for my Rem 700 26" HB 223 for Ground Squirrels. Have H335 on hand, LC 16 brass, and Win or Fed Small Rifle or CCI Small Rifle Magnum primers. Where should we start and work up grain-wise - 25? Any other tips?
    Originally posted by Sierra57
    Civil War 2.0 - If it comes to pass, the America-hating Leftists will have brought it upon themselves. I value Freedom more than their sorry lives and the form of Governance they espouse, which offers no Freedom and complete servitude to the State.
    "We have four boxes with which to defend our Freedoms: the Soap box, the Ballot box, the Jury box, and the Cartridge box" - Ed Howdershelt
  • #2
    the86d
    Calguns Addict
    • Jul 2011
    • 9587

    Google took me here...
    Need advice on powder/load for a 40 gr. bullet in .223 Remington. Don't have access to range to work up load-need general load that is safe and will usually give adequate velocity and accuracy.


    Using pulled 40gr blue tip vmax, at near NATO velocities, I got an exit wound in a rooster (that attacked my friend's daughter's face), about the size of a softball... Or about would fit most of a softball from a 20" AR.
    Last edited by the86d; 05-16-2019, 11:01 AM.

    Comment

    • #3
      MongooseV8
      Veteran Member
      • Apr 2010
      • 4426

      Hodgdon lists 26 grains at min coal 2.280" as a starting load. Since you are using military brass keep in mind your lower case capacity. If it were me Id start at 26 grains at about 2.300" and work up from there.

      Ive used several jugs of H335 in a few 223AI and find it likes to be on the hotter side but start low and see what your setup prefers.

      Comment

      Working...
      UA-8071174-1