Armscor projectiles

[RacerX7]

Has anyone used armscor bullets? How did they perform.?

[smoothy8500]

5.56/223 were not that accurate. For a few cents more per projectile the Hornady bulk FMJ's are fairly accurate.

[Catch]

Similar experience as smoothy. 62gr fmj can't do better than 2.5"
Same loading w/ hornady gives me an inch.

[JackEllis]

Twist rate might make a difference if they're heavier bullets. I have some 62 grain Federal Fusion pulls that shoot surprisingly well out of a Tikka with an 8" twist but I won't even try those same rounds in a Howa 1500 with a 10" twist.

[RacerX7]

Anyone use the 115gr 9mm. I'm thinking of getting some. They're pretty cheap in price when you just want to shoot paper.

[smoothy8500]

Their pistol projectiles are probably ok based on my experience with 230-grain FMJ 45 ACP "brass" jackets that I reloaded a few years back. Accuracy at 25yds was fine.

[destrudo]

I've gone through probably 10,000 of the 115gr projectiles.

Construction materials are not consistent lot to lot but for cheapo plinking ammo with true jackets, it's good stuff.

I'm graduating to using HAP 125's since they're the only other jacketed I can get in true bulk, but I'll probably continue to buy the projectiles for my plinking loads just because they work well.