Tweet
So after several trips to home depot i finally found the right pieces able to link the Lee case feed adapter to the dillon case feed adapter. I saw lots of unique ideas on YT but most were about building a frame out of piping to hold the adapter over the dillon. Instead I wanted something small and sturdy that doesnt require welding, drilling and is super cheap. These two pieces cost $2 total. Found in the plumbing section of your local HD. I have one for small plastic insert that links to the hole on the lee adapter for small calibers and a separate insert for larger calibers.
one wrap of electrical tape on the base of the copper insert to get a snug fit on the larger dillon case feed adapters, such as the red 45acp adapter. Used a step drill to open up the plastic inserts to be able to mate the adapters.
one wrap of electrical tape on the base of the copper insert to get a snug fit on the larger dillon case feed adapters, such as the red 45acp adapter. Used a step drill to open up the plastic inserts to be able to mate the adapters.
