Lee Case Feeder on Dillon 650

[RiskyBusiness]

Need some advice or tips on how I could mount this universal casefeeder to my 650. So far I've seen someone weld two copper tubes together to join the base of the feeder to the dillon case feed adapter. The other option is welding metal brackets to create a stand that can hold above it the case feeder and tubes.

Both require welding and i dont have the equipment for that. Thought maybe you guys would have an idea using pvc or wood thats more readily available.

Here are those videos i mentioned.

[mmlook]

if you're reloading 9 or 40. look at the daa mini case feeder

https://www.doublealpha.biz/us/mini-xl650-case-feeder

[RiskyBusiness]

Saw it but instantly got turned off that it cant do 45 and its double the cost of the Lee.

I've written down the ID dimensions of a few adapters so I'll try to find something at home depot that can link the joints together.

1) either a single clear tubing angled and stretched out to slide down cases straight into the case feed plug
2) a PVC pipe jigged to the press as a frame to hold the Lee adapter

I'll keep updating as I experiment

[tonyjr]

You can make one with angle iron [ old bed frame ] .
Ebay has plastic dividers for tubes . Rubber bands also help .
I drilled a small hole about 1 1/2 inches from bottom .
You can pre-load that way .
Hit a small nail with hammer - instant small drill .
Tooth picks hold in shells / cases - easier to load .