38 super

[captn-tin]

Can a 9mm lee factory crimp die be used on 38 super brass? Thanks

[captn-tin]

bump

[NeilMo]

Nope. The sizer ring of the 9mm FCD is smaller to accommodate the 9mm case mouth at .380". The 38 Super has a case mouth of .384". I suppose you could do it but squeezing the bullet that extra .004" will not help accuracy much. There's a reason that Lee makes both. Buy the correct die.

[OzzieF]

For Dillon dies, only different one is the sizing die. The powder/seatingand crimp die are interchangeable between 9mm and super. So I would say yes the lee crimp die from 9mm will work on super.