ARMSCOR 62gr FMJBT

[rg52]

Anybody out there have any experience with this bullet?Bought some (was all that seemed to be available) to make some plinking rounds for ar-15 1:7 and 1:9 twist.Recipes, suggestions????

[Rhys898]

What kinds of powder do you have? I just got my box of 500 of these and have quickload so I can run some numbers to give you a starting point. Also what are your barrel lengths.

[Darklyte27]

no and yes it will be fine for plinking

[rg52]

Win.748 . 16" and 20" barrels.Open to other powder suggestions (if I can find 'em).Can't seem to find any load data for anything similar.

[Darklyte27]

win 748 works, H335, Ramshot Tac,
H4895 Varget these two are usually more expensive

[radio2]

Win 748
COAL 2.255
62 FMJBT
23.5 Min.
25.5 Max
CCi #41 primer (Book says use magnum primers)

[Rhys898]

Win 748
COAL 2.255
62 FMJBT
23.5 Min.
25.5 Max
CCi #41 primer (Book says use magnum primers)

QL says on a 16" barrel that min. will get you 2635fps,
that max will get you 2885fps but it's at 55k psi so deffinately work up and check for pressure signs.

20" barrel will get you 2795fps at min and 3045fps at max at 55.5k psi

Hope this helps

Jer

[rg52]

Thanks guys!Very helpful info.

[cleanguy46]

I have about 100 Speer 62gr FMJBT and been looking for a good recipe for a load. I have Varget, H335 and H322 using a CCI #41 primer. The loading manuals are devoid of this info which has me guessing and i am not willing to do that. Any help is greatly appreciated!

[radio2]

62 GN FMJBT
H335
COAL 2.255
23 GN MIN-FPS 2625
25 GN Max-FPS 2885
CCI #41

[LongRangeShootin]

i also bought a ton of those and asked the same question. i played around and out of my 20" 1:9", 24gr of either bl(c)2 or h335 both shoot POA at 100 yards.