Unconfigured Ad Widget

Collapse

Help me choose a reloading setup

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • anonymouscuban
    Senior Member
    • Feb 2017
    • 1440

    Help me choose a reloading setup

    Hey all.

    I have read through the Reload 101 stickied post. Have read the basic steps on the reload process. I have also browsed some of the other stuff posted by folks. Even after all that, I've decided I to travel down the rabbit hole of reloading.

    I currently only shoot 9mm. I currently go through about 500 rounds a month but I plan to start competition shooting so this demand will go up. I want to reload to save some money but more so because I like tinkering with stuff and it looks like fun.

    Based on what I've read, I think I want to get a progressive reloader. My budget is roughly $500. However, I don't want to spend $500 now only to outgrow the setup a year from now. If I have to spend more I am willing to. I actually don't mind doubling my budget to get something that will last me a long time.

    So with that said, can you help me put together a reload setup?

    Thanks for the help guys.

    Sent from my SM-G930F using Tapatalk
  • #2
    3006Daddy
    Member
    • Jan 2013
    • 337

    You could pickup a used hornady progressive press on here for a little north of 300. As you grow you can add a bullet feeder and case feeder. Plenty of press for what you are looking to do.

    Sent from my SM-G930T using Tapatalk

    Comment

    • #3
      Sal0327
      Member
      • Oct 2012
      • 316

      With you shooting 500+ rounds I would suggest Dillon xl650. Save a little more, your almost there. Keep an eye out for a setup on used reloading section here. AND your not going to save much money by you reloading. just gonna buy more supplies and have access to more ammo when you want it.

      Comment

      • #4
        BajaJames83
        Calguns Addict
        • Jun 2011
        • 6047

        Look into a dillon 550 or 650.
        650 especially if you know that you want to grow.

        Honestly unless you want to have to mess with it often dont drink the red koolaid, while there are a few that will come along and argue that. Ive drank them all Green, red, red, and blue. Blue is expensive for a reason it works.....

        when i got into reloading I started with Lee, moved to Hornady and finally found a old dillon 450 man that thing changed my reloading life.
        Last edited by BajaJames83; 11-03-2018, 2:10 PM.
        NRA Endowment Life Member
        USMC 2001-2012

        Never make yourself too available or useful...... Semper Fidelis

        John Dickerson: What keeps you awake at night?
        James Mattis: Nothing, I keep other people awake at night.

        Comment

        • #5
          bruce381
          Senior Member
          • Feb 2009
          • 2454

          650 the base model forget the
          case feeder
          strong mount
          roller handle etc for now add latter.

          Comment

          • #6
            RandyD
            Calguns Addict
            • Jan 2009
            • 6673

            I can sell my Dillon presses for more than what I paid for them. There are very few items, that appreciate in value, especially those that incur wear and tear, because Dillon backs their presses with a no BS guarantee, buying a used one is not a risk.
            sigpic

            Comment

            • #7
              Divernhunter
              Calguns Addict
              • May 2010
              • 8753

              Dillon 650 WITH case feeder and forget the strong mount depending on your bench. Mine is mounted on a 1/4" thick steel bench I welded up just for reloading. It also has a dedicated 50BMG press on it. Strong mount is a waste of money and no help for "my" set up. Get the roller handle and Dillon dies. Need a primer flipper.


              Then load up with primers/powder/bullets once you settled on a load.

              Save up some more money and you will be glad you did.
              A 30cal will reach out and touch them. A 50cal will kick their butt.
              NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
              SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

              Comment

              • #8
                alpha_romeo_XV
                Veteran Member
                • Jun 2006
                • 3210

                OP only shooting 9mm now? Sounds like you need some caliber conversion therapy.
                Once you're set up for reloading its just as cheap and easy to load expensive rounds like 357-sig or 30-carbine.
                When you get into rifle rounds then reloading for highly accurate match rounds is very cost effective too.

                Comment

                • #9
                  mofo1111
                  Member
                  • Apr 2010
                  • 250

                  I have the Dillon 650XL. You can buy a new one or buy used, then package up the used one and send it to Dillon(if you want to have it freshened up), and they will go through the whole machine and make like new. But honestly, unless you get a great deal, Dillons don’t lose too much value. You’re not gaining much on the 650 over the 550 unless you get the case feeder to speed up the process. The roller handle is a good upgrade. Dillon has send out replacement parts quickly with no questions asked. Happy with my Dillon 650 but I haven’t played with any other machines.

                  Comment

                  • #10
                    angry
                    Member
                    • May 2012
                    • 323

                    Dillon xl 650
                    The people who know you, don't even like you anyway

                    Comment

                    • #11
                      at_liberty
                      Senior Member
                      • Jun 2010
                      • 699

                      I used to turn out a lot of 9mm ammo very quickly on my Lee Pro1000 with case and bullet feeder, priming on the press. That rig has its challenges but did succeed in providing the desired productivity. It would be a good match for your budget as a one cartridge loader.

                      However, now I am doing my bulk 38 Special for cowboy action using a Lee Auto Breechlock Pro. It is a four station progressive. I prime on the press, although with practice I did have to gain a touch for priming system. If I did more 9mm, very much in the background lately, shooting revolvers, I would probably get the shellplate for 9mm and use the new press, which really is a refinement and extension of the Pro1000 concept. The new press is also very economical, noting that it is sold bare bones and requires some accessories.

                      Nothing wrong with a heavier five station unit like my Hornady LnL AP or a Dillon 650XL, et al., but that would be at least double the investment, if fully equipped. No question the bigger machines are great long term investments, but it seems to me that a new loader making that leap is pretty much the exception.
                      Last edited by at_liberty; 11-04-2018, 7:47 AM.

                      Comment

                      • #12
                        rcslotcar
                        Senior Member
                        • Jul 2014
                        • 1100

                        Another for the blue,, xl650. The machine is fast and puts out quality finished ammo. There are a lot of upgrades that can be added to the basic machine as funds are available.

                        Comment

                        • #13
                          trackcage
                          Senior Member
                          • Apr 2015
                          • 1777

                          I shoot competition and load 20k per year on a dillon 550. It works but I absolutely would not recommend anything less than a dillon 650 for what you're doing.

                          I bought a 550 because I load a bunch of different calibers and changing over is easier on a 550 than a 650. Not a problem you will have. I still might get a 650 just for 9mm, which is my highest volume caliber

                          Comment

                          • #14
                            BajaJames83
                            Calguns Addict
                            • Jun 2011
                            • 6047

                            you can get a 650 for $600 shipped pretty hard to pass that up these days
                            NRA Endowment Life Member
                            USMC 2001-2012

                            Never make yourself too available or useful...... Semper Fidelis

                            John Dickerson: What keeps you awake at night?
                            James Mattis: Nothing, I keep other people awake at night.

                            Comment

                            • #15
                              SoCal1911
                              Member
                              • Jul 2007
                              • 298

                              Have you ever reloaded before? It is always better to start with a single stage press first. Once you get the hang of reloading on a single stage press, and know what each step does, then move up to a progressive press. Too many operations going on at the same time with a progressive. You can pick up a used single press cheap, and you can always use it. Plus anything you buy besides the single stage press it self, you can use with the progressive. Find someone that is already a reloader and ask to watch or use their equipment to get some insight. Find out what their recipe is for the caliber you want to load, buy the powder, primers and bullets and ask if they will help you load up a batch. Most reloaders will go out of their way to help a newbie and teach them the ropes. Were are you located?

                              Comment

                              Working...
                              UA-8071174-1