The question unanswered, Dillon toolhead storage?

[Citadelgrad87]

Got a bunch of 550 toolheads, many with powder measures. The Dillon branded singe pedestals blow.

The decent stull looks pretty pricey, a seven head wall rack out of powder coated steel for $160 or so.

Id like something to hold at least 5 and i can double that up.

Not opposed to making something, preferably of wood.

Ideas?

[kcstott]

I bought some wood doweling turned down one end to make a step and drilled a row of blind holes in a 1x3, glued them in and called it good. Cost more in time than materials.

[brad96cdc]

I bought some wood doweling turned down one end to make a step and drilled a row of blind holes in a 1x3, glued them in and called it good. Cost more in time than materials.

Pictures?


Sent from my iPhone using Tapatalk

[ar15barrels]

I use the Dillon stands.
They work good.
Just build a shelf with enough height so they fit.

[Rwnielsen]

covers

I use the Dillon stands.
They work good.
Just build a shelf with enough height so they fit.

And get the canvas covers for them, they'll look good

https://www.dillonprecision.com/dillon-rf-100-quick-change-nylon-packcloth-dust-cover_8_116_23479.html

[kcstott]

Pictures?


Sent from my iPhone using Tapatalk

Look at a Dillon stand. Just make with multiple posts and one long board

[fguffey]

I use microfilm file cabinets, One of the most useless storage pieces of equipment is a file with deep drawers. Most of my cabinets have 11 drawers, the drawers are shallow; that makes it almost impossible to bury reloading equipment to the point it is hidden.

F. Guffey

https://worldmicrographics.com/used-microfilm-cabinets/

I have 8.

[mrkubota]

https://m.facebook.com/groups/1487847584782840?view=permalink&id=2258148057752785

[ar15barrels]

And get the canvas covers for them, they'll look good

https://www.dillonprecision.com/dill...116_23479.html

My reloading room is a low dust environment so I don't really need the covers.

[the86d]

Some people cut them from acrylic, and they are about $20 for a 3x holder.

Not as sturdy, or fancy as the Dillon's, but WAY cheaper for bulk heads...

[smoothy8500]

F. Guffey

https://worldmicrographics.com/used-microfilm-cabinets/

I have 8.

Cabinets at $500 to $1,000 each? Hmmm, I'll make shelves....

[Citadelgrad87]

Cabinets at $500 to $1,000 each? Hmmm, I'll make shelves....

And he has eight of them.....

[reverser]

[bohoki]

just a large carrige bolt through a board a couple nuts jammed for the stopper and some bumpons for anti slip feet

[bruce381]

I'm easy only have 1 powder measure and move it head to head as needed.
the tool heads are all in 1 gallon zip lock bags.
stacked on a shelf have 8 heads.