Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Reloading 5.56 surplus
Collapse
X
-
Reloading 5.56 surplus
Tags: None -
Primers pockets need to be swaged or reamed. Lot of 5.56 is magnetic steel core or tipped so cannot shoot on blm and a lot of ranges. commercial 223 brass is cheap . -
Great info guys, thanks! I was looking at the RCBS Trim Mate, to swag, trim, chamfer and deburr all in one process.
Edgerly mentioned a lot of 5.56 surplus is magnetic steel core. Any way of knowing how to find this in advance?Comment
-
That ammo you linked. Can't shoot anywhere. That's SHTF ammo. Don't buy nothing with green tips.Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
I really miss the good old Pomona Gun Shows.
I'm Back.Comment
-
Last edited by baih777; 04-22-2018, 8:44 PM.Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
I really miss the good old Pomona Gun Shows.
I'm Back.Comment
-
Awesome thanks so much! I'd planned to get in the habit of incorporating swaging the pockets into my workflow regardless.Comment
-
I think it depends on how fast you want to swage. If you’re a shell at a time, then no problem.
If you get bored of the same task a couple hundred of cases, then reloading isn’t for you. Or, only shoot and reload commercial.
I only reload commercial.Comment
-
The Dillon Super Swager unit works well and is fast for Swaging the pockets.
A HD decap only die makes fast work of popping out the primers. Or you can get the little lee unit that you use a hammer with. It works well but is slower.
I am not sure about Berdan primed ammo in 223/5.56 but be sure not to get any if it is around.A 30cal will reach out and touch them. A 50cal will kick their butt.
NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society memberComment
-
A #2 Phillips bit and a cheapo hf drill press ream primer crimp in about 2 secondssigpic
Originally posted by dantoddWe will win. We are right. We will never stop fighting.Originally posted by bwieseThey don't believe it's possible, but then Alison didn't believe there'd be 350K - 400K OLLs in CA either.Originally posted by louisianagirlOur fate is ours alone to decide as long as we remain armed heavily enough to dictate it.Comment
-
You can get a Lyman crimp reamer, and they are about $11, but they wear quickly, and I don't recommend.
Before I had a crimp reamer, or the Dillon Swager, I was using countersink drill bits.
No issue with steel case/core (what some people call "magnetic" for some reason, like it will stick to your barrel or something?) or green tips at my local range, or at Raahauge's AFAIK.
I think this ammo is only an issue at an indoor range, BLM, or at some commie ranges.Last edited by the86d; 04-23-2018, 5:41 AM.Comment
-
I have a half dozen cutter types and even a RCBS Pocket Swager but hands down the Dillon is the best for me and my friends.
After using the Dillon my friends will not use any of the others also.
I would sell the RCBS unit if I could. It has sat idle for many, many years.A 30cal will reach out and touch them. A 50cal will kick their butt.
NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society memberComment
-
Great info, and thanks for clearing up about the steel core cases. Sounds like it may be an issue only at some ranges.
As for the Dillon swager, is this the one you guys are referring to?
Comment
-
^^
Yes, the one and only swager that you will ever need.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,844
Posts: 25,176,547
Members: 358,862
Active Members: 5,396
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 28715 users online. 99 members and 28616 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment