Which reloading manuals have the most information about xtreme bullets?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Reloading manuals
Collapse
X
-
NRA Life Member since 1990
They're not liberals, they're leftists. Please don't use the former for the latter. Liberals are Locke, Jefferson, Burke, Hayek. Leftists are progressives, Prussian state-socialists, fascists. Liberals stand against the state and unequivocally support liberty. Leftists support state tyranny.

-
Comment
-
Calling xtreme would be a better thing to use..
They reccomend using speer #14 data for their bullets
Sent from my SM-N950U using TapatalkNRA Life Member
WARNING: This post may contain material offensive to those who lack wit, humor, and common sense. Some overly sensitive "men" will be offended.
Originally posted by ivanimalI love you! (some Homo)Originally posted by ivanimalI am a Gay muslim sometimes.Go Broncos!Originally posted by KestryllOP you are an uninformed tool.
Go Kings Go!

Comment
-
I haven't seen manuals as of yet that offer loads for plated bullets from xtreme.
Like others have mentioned, use lead data. What caliber and bullet are you loading? Just to be clear, I do not have any of the new manuals. Hornady #9 being my latest, followed by Speer #13. Current powder web sites really don't help as yet.Comment
-
I am still using Speer #12 from October 1995.I haven't seen manuals as of yet that offer loads for plated bullets from xtreme.
Like others have mentioned, use lead data. What caliber and bullet are you loading? Just to be clear, I do not have any of the new manuals. Hornady #9 being my latest, followed by Speer #13. Current powder web sites really don't help as yet.
Comment
-
The Speer Manual and 1nd Lee .
But I don't do plated , coated or lead . Just jacketed .
To me the worse manual is barnes .
Just go to ebay and buyused and look up lead / cast .life member - CRPA and NRA
All ways listen - after you can say I new thatComment
-
I like Lyman manuals the seem to have more cast data, and as above keeping to 1200 fps is a safe no fouling speed extreme suggests not to exceed 1500 fps, just for discussion the polymer coated cast bullets can be pushed to 2200 fpsRemember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.
If you don't turn in your guns, they can't make you ride in the cattle cars.
sigpicComment
-
NRA Life Member since 1990
They're not liberals, they're leftists. Please don't use the former for the latter. Liberals are Locke, Jefferson, Burke, Hayek. Leftists are progressives, Prussian state-socialists, fascists. Liberals stand against the state and unequivocally support liberty. Leftists support state tyranny.

Comment
-
If you want specific data for plated bullets, you can get it from Hodgdon's reloading data website http://www.hodgdonreloading.com/data/pistol and you can also download accurate arms's reloading guide in pdf Form http://www.accuratepowder.com/load-data/ by clicking on VIEW COMPLETE LOAD GUIDE. Both sources have specific data for plated bullets. As posted by another, the Lee manual has data too. Somewhere in one of my computer drives I have the data Rainier published when they first came about. PM me an email address and I'll send it if I can find itComment
-
Thats because 165gr is a damn heavy pill for a 9mm Nato. and it's far to heavy for Bullseye, it can be done but you are going to have to pick a slower powder and back way down on a powder charge for a 147 and see what that gets you. You may not be able to use it, as it may not allow safe seating depth and still function in the magazine.
I do find it interesting that people are confused that a reloading manual will not have their specific bullet in it. I also find it interesting all the BS on "Use lead data" That just shows me people are going about this blind. I guess I'm old enough to have learned more than a few lessons from older long time lead shooters. It's velocity that you are concerned with not lead data. and what lead alloy? #2 Linotype? or what? With or without a gas check?
With a few exceptions of extremely light bullets at extremely high velocity or the modern high velocity magnums such as the .460 S&W or the .480 Ruger, or the .500 S&W. You can use jacketed data with no issue.
Let me show you what I mean.
Lyman 47th edition data
9mm nato 125gr JSP Bullseye 3.3gr @ 876 fps, to 4.8gr @ 1142 fps
9mm nato 121gr lead alloy #2 Bullseye 3.7 @ 950 fps, to 4.4 @ 1125 fps
38 Special 158gr JHP Unique 4.7gr @ 645 fps, to 5.0 @ 710 fps
38 Special 158gr Lead round nose Linotype Unique 3.4gr @ 611 to 5.1 @ 896
45 acp 230gr FMJ Unique 5.0gr @ 677 fps, to 6.8gr @ 916 fps
45 acp 225 gr #2 lead alloy Unique 5.5gr @ 695 fps, to 7.3gr @ 905 fps
So you can see on conventional handgun loads lead or jackets data don't matter. if you want to reduce leading in the barrel use a gas check round (nearly unheard of except magnums and rifle rounds but can be done none the less) or keep your maximum velocity at manual stated max or 1100 fps which ever is less. That said I've seen published data for magnum lead bullets doing 1400 FPS. This is why is pays to buy a reloading manual, Buy more than one reloading manual and read the thing and study it. You will start to see correlations like this and you will be able to dispel the internet BS. then one day you can make an educated guess on what would be a safe powder and charge for a round with no published data and do it safely.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,884
Posts: 25,177,091
Members: 358,862
Active Members: 5,395
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 27720 users online. 61 members and 27659 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment