Unconfigured Ad Widget

Collapse

Barnes Accurate?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Divernhunter
    Calguns Addict
    • May 2010
    • 8753

    Barnes Accurate?

    I have seen others complain about accuracy with the Barnes bullets. I have also seen some tell me I am wrong about lots of bullet jump being good.

    I tell people there are 4 basic rules to use with Barnes and a couple of general things to remember.
    Here are a couple of photos to show my point. The 257W has over 1/4" jump. Also consider that I shoot only with a bag under the forearm and the buttstock in my shoulder. Groups are shot when I shoot many in one day for testing all sorts of cartridges including mags. Also consider that some days I shoot well and some I cannot hit the barn from the inside.
    Last edited by Divernhunter; 09-13-2023, 10:37 AM.
    A 30cal will reach out and touch them. A 50cal will kick their butt.
    NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
    SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member
  • #2
    Timbob55
    Senior Member
    • Mar 2009
    • 1046

    More evidence of rifle, load, bullet combo being important.
    Tim Harris
    CWO3 USCG (ret)

    "Whoever said the pen is mightier than the sword obviously never encountered automatic weapons."
    Gen. Douglas MacArthur


    Requiro Pax Sed Praeparo Nam Bellum

    Comment

    • #3
      JackEllis
      Veteran Member
      • Nov 2015
      • 2731

      Maybe I'm not obsessive enough but I consider groups around 1 to 1-1/4" good enough for hunting at the distances I shoot. When someone says they can't get decent groups, it's sort of meaningless to me unless they also talk about their expectations in concrete terms.

      I haven't tried shooting anything with a copper round just yet but my only complaint about the Hornady GMX rounds I've been fooling with is the point of impact, which is around 6-8" higher than the point of aim. The rifle is set up to shoot 2" above the point of aim at 100 yards with Remington 150 grain Core-Lokts. Hornady SSTs shoot about 4" high.

      Comment

      • #4
        ruggyh
        Member
        • Mar 2012
        • 203

        I have seen others complain about accuracy with the Barnes bullets.
        1. Most I think are just repeating Internet drivel.
        My experence at the range is they complain- I ask them to shoot a few of
        mine and they group without issue
        2. Early on individuals were trying them in rifles with slow twist rates and they
        would stabilize. As you
        know copper monoliths are long for weight.

        I have also seen some tell me I am wrong about lots of bullet jump being good.
        Barnes says you are right and I have found no issue with more bullet jumps with any brand monolithic bullet in the stuff I shoot.

        In the end the target tells the story..

        be safe
        Ruggy

        Comment

        • #5
          pennstater
          Veteran Member
          • Aug 2010
          • 4677

          Divernhunter, When I hunted "big game" in Ca., I loaded up some 150gr TSX in my .270. To the same OAL as my Hornady Interlock 150's. I may have been lucky, but, they hit at the same point, both. My OAL is 3.275". With the TSX, I'm not sure how far off the lands I am, but, I get no pressure sighs at all. As mentioned, accurate.

          Comment

          • #6
            tonyjr
            Senior Member
            • Nov 2015
            • 1448

            Barns is the worse reloading manual I have .
            I bought some of their copper bullets for the 50 AE .
            Way to long to use .
            I asked them in an email , the next day their website said you can
            not use them on the AE .
            Another person at range wanted to try in his python - I only loaded
            3 groups of 5 . He like them . I traded to him for M T 44 and 50 cases .
            life member - CRPA and NRA
            All ways listen - after you can say I new that

            Comment

            • #7
              stevec223
              Senior Member
              • Jul 2011
              • 1620

              When using unleaded barnes or nosler bullets,,,,, I use the tested by ( and recommended) coal that the manufacturer recommends..... Period... My hunting rifles WILL find sub MOA groups on ladder tests of .05grs ,,, between minimum to maximum loads... I also always use a powder that is listed in the manual or online,, and go by the tested minimum and maximum listed... The Barnes book is great and online site shows additional powder tested usually... The nosler book is excellent,, and the new online data is fantastic with the addition of new powders tested... Dont guess with unleaded bullets... A minimum of homework will really pay off....
              Cheers

              Comment

              • #8
                Divernhunter
                Calguns Addict
                • May 2010
                • 8753

                Since the mono-type bullets preform better the faster you push them I load powders that give max speeds. Barnes usually groups better the faster you push them and terminal performance is better also.
                Yes use data that is for the Barnes bullets and not other brands. The Noslers lack the relief grooves(much like the old BarnesX-Bullets that gave troubles) and Nosler states to only use their middle listed load for the E-Tips. This is why I will not use them.
                I and some friends did not have great luck with the Hornady GMX. That said I have a friend who has great performance in his 7mag with them. They(and the Nosler E-Tip) are made of the same material as the regular bullets jackets. It is harder than Barnes and thus slower to open in my mind. That is not to say they will not work.
                I have tried different things but the Barnes loaded so the top relief groove just showing(or shorter?) is the best way tooled them. If you look at the Barnes factory ammo they are all loaded to the top relief groove. I do not crimp any of mine(or other bullets) even in the mags. The Barnes 130gr .308 bullets suggests a light crimp but I have not done so and have had no problems.

                My 2 Cents
                A 30cal will reach out and touch them. A 50cal will kick their butt.
                NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
                SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

                Comment

                • #9
                  silvertriple
                  Senior Member
                  • Feb 2011
                  • 749

                  Barnes TTSX are plenty accurate and shoots moa or less. They like lots of jump and to be pushed fast. Usually around 0.050" jump or more will do the trick.

                  Comment

                  • #10
                    jmitchell
                    Junior Member
                    • Sep 2013
                    • 41

                    Originally posted by silvertriple
                    Barnes TTSX are plenty accurate and shoots moa or less. They like lots of jump and to be pushed fast. Usually around 0.050" jump or more will do the trick.

                    Can you explain why they like a long jump versus e.g., being tolerant/ambivalent to jump distance?

                    Thanks.

                    Comment

                    • #11
                      kcstott
                      I need a LIFE!!
                      • Nov 2011
                      • 11796

                      Originally posted by jmitchell
                      Can you explain why they like a long jump versus e.g., being tolerant/ambivalent to jump distance?

                      Thanks.
                      Explain to me why SMK are fully jump tolerant and so are Berger VLD's but Sierra TMK's and Nosler RDF's need to be seated within .005 of the lands in my rifle?

                      If someone can answer that question as to why and what to do about it in every rifle they will be a very rich person. Initial reloading is experimentation, finding the correct combo that works to the level we desire. thats all.

                      Comment

                      • #12
                        Divernhunter
                        Calguns Addict
                        • May 2010
                        • 8753

                        Not really the "why" but do know they need jump and work great with a lot of jump. This also allows for hotter loads without pressure problems. Much like Weatherby does with their rifles.
                        I have also found the Nosler AB want jump for best accuracy. Same goes for the Swift bullets. An example: My daughters 257R using 100gr Swift Sirocco bullets will put 5 into a super small group( like touching) so I loaded up 50 more for her. Went out to re-zero the rifle since it was zeroed for 120gr A-Frames. Was getting 1.5-2" groups. Thought something wrong with rifle or scope. Scope is a Leupold and not the trouble. Checked all screws on rifle and all were good. Looked at ammo and noticed the rounds were longer than the old ones. Checked info in my notebook and realized they were seated long. re-seated them deeper and retested and the rifle is back to it tiny groups.
                        A 30cal will reach out and touch them. A 50cal will kick their butt.
                        NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
                        SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

                        Comment

                        • #13
                          silvertriple
                          Senior Member
                          • Feb 2011
                          • 749

                          Originally posted by jmitchell
                          Can you explain why they like a long jump versus e.g., being tolerant/ambivalent to jump distance?

                          Thanks.

                          As kcstott mentioned - nobody knows why. Every bullet will end up with "x" amount of distance from the lands to shoot best. Some even like to be jammed into the lands. Even the same bullet will require different jump distances in different rifles to shoot well. That is why during load development we play with seating depth after finding the best node to work with. Now from combining many shooters' experience we can kind of predict a good starting jump distance for some types of bullets. Again, this gets you close but doesn't mean it'll be the best.

                          For the Barnes, my best guess is that it likes to be jump started before hittting the lands. Barnes probably saw this during their R&D of the tsx line and recommend a jump of 0.030" or more. From my experience loading the ttsx in 4 different rifles is that a 0.050" jump or more is needed to shoot well.

                          Comment

                          • #14
                            tonyjr
                            Senior Member
                            • Nov 2015
                            • 1448

                            It has to do with the softness / hardness of the copper .
                            When the pill jumps , it allows some gas to get around
                            pill . This kind of preheats it and the lands / groves .
                            There is a bunch of " stuff " happening .
                            If you search , you will find people like to sort cases by
                            brand and some by lot # .
                            You start getting into it different primers - brands / types
                            - regular , magnum , bench rest also effect group size .
                            In my case , I only use CCI primers [ magnum as much as
                            possible ] Hodgdon powers [ ball ] and jacketed bullets .
                            life member - CRPA and NRA
                            All ways listen - after you can say I new that

                            Comment

                            • #15
                              Scottie15
                              Senior Member
                              • Jan 2009
                              • 992

                              Originally posted by tonyjr
                              It has to do with the softness / hardness of the copper .
                              This has always been my assumption - hardness/softness/thickness of the jacket material or the mono bullet lends to different tolerances for jump and downrange accuracy assuming good concentricity of the loaded round.
                              Its an expensive hobby, but more expensive when you try and convince yourself you don't need what you really want.

                              Comment

                              Working...
                              UA-8071174-1