I'll just leave this here

[kcstott]

My new toy.









Sorry like I said the RCBS chargemaster is just not accurate enough for me.

[Whiskey_Tango]

I thought this would be a Prometheus thread.

[madbeans88]

Oooo fancy

[McGuiver]

Nice. To what resolution does it read?


Sent from my iPad using Tapatalk

[5.56Geo]

What is that, a vegan blender?

[Mesa Defense]

Sweet setup. Well done.

[Mesa Defense]

PM sent.

[DDRH]

Very Nice! I've only setup the balance (AnD FX120), just got my Area419 powder cup and V2 base. Can't wait to get it all setup.

Resolution is 0.001grams or 0.02gn, but the Gram setting is slightly more accurate.

0.001g = 0.015gn

[XDJYo]

What is that, a vegan blender?

Yup! Looks like the Nutri Ninja. https://www.ninjakitchen.com/blender...s/nutri-ninja/

Probably has the wheat grass extractor attachment.

[Sir Toast]

Well done sir! I use the RCBS Chargemaster and then fine tune the charge with a Gempro 250. I like your setup more but I think you're going to be disappointed with the Lee powder dispenser. I have an RCBS powder throw and a Hornady powder throw. I recommend the Hornady over the RCBS and the RCBS over the Lee.

[kcstott]

I thought this would be a Prometheus thread.

Sorry I spent a boat load on this not a yacht load

[DDRH]

Well done sir! I use the RCBS Chargemaster and then fine tune the charge with a Gempro 250. I like your setup more but I think you're going to be disappointed with the Lee powder dispenser. I have an RCBS powder throw and a Hornady powder throw. I recommend the Hornady over the RCBS and the RCBS over the Lee.

i also have a similar setup. As for the Autotrickler and AutoCharge setup with the AnD Balance, the balance is at the heart of the system. it's quite fast and wind shield offers a good way to block and drafts and still have some room to maneuver a powder cup and the trickler...although i wish there was an option for a taller wind screen.

The LEE autocharge is the only option they have for this setup. I'm not familiar with the Hornady and RCBS. Perhaps there's a way to modify/fit the motor to run with the RCBS/Hornady?

[DDRH]

Area 419 V2 Base and powder cup in the background

[kcstott]

What is that, a vegan blender?

A vegan wouldn't fit in there. But I do know a shop that have a large material grinder I'm sure two or three vegans at time could be shoved in the hopper

[kcstott]

Well done sir! I use the RCBS Chargemaster and then fine tune the charge with a Gempro 250. I like your setup more but I think you're going to be disappointed with the Lee powder dispenser. I have an RCBS powder throw and a Hornady powder throw. I recommend the Hornady over the RCBS and the RCBS over the Lee.

Well I thought about that. but heres the deal. The powder throw don't matter as this unit first throws a charge then the auto trickle kicks in and ramps down to nail the powder charge down to the .02grain or .001gram depending on what unit of measure you are in. so you just set the powder measure 2 grains light and the trickler kicks in from there. I have a spare uniflow powder measure that if I can adapt I will But only for greater powder capacity.

Posted the video on a quick demo