What does your reloading setup look like?

[5150Marcelo]

I like that. Very squared away

Hey guey, ppost a pic of your set up. I wanna see what im gonna be working with

[USN CHIEF]

Hey guey, ppost a pic of your set up. I wanna see what im gonna be working with

Chale guey, I have already posted like a million pics of it. Once I get home tonight I will post a pic for you guey.

[ChrisXD45T]

RCBS Rockchucker
Redding T7 turret - coming soon
Lee hand press
RCBS universal hand priming tool
RCBS Chargemaster
Dillon 1200B case trimmer for .308 and .223
Lee trimmer and cutter for everything else
Lyman 1200 turbo tumbler

[5150Marcelo]

Chale guey, I have already posted like a million pics of it. Once I get home tonight I will post a pic for you guey.

gracias!

[Full Clip]

Mostly RCBS.

[TEX1966]

Dillon XL650 with case feeder.
Hornady classic lock and load single stage press.
Dillon rapid trim with .223 and .308 trim dies.
4 complete tool heads for 650 (.45 ACP, 40 S&W, .223 and .308).
RCBS 5-0-5 scale.
RCBS uniflow powder measure.
RCBS dies (9 mm, 40 s&w, 45 acp, .223, .308, 30 carbine and .44 mag).
3 misc tumblers. 1 = walnut/polish, 2 = corncob 2nd tumble and 3 = delube.
Hornandy dial caliper.
RCBS hand priming tool.
Midway electra trickler.
Many assorted units (loading tray, lube pad and lube, primer flip tray, case gauges, lock and load extra bushings and several others.
RCBS case prep center with several accessories.
+ lots of powder, primers, brass and bullets.
I use my neighbors dillon super swage to swage brass.
I started reloading 20 years ago.
Big investment over a long time.

[ar15barrels]

Where's the "All of the above" option?

I had to select every box in the poll...
Here's ONE of my benches:



I load for about 40 cartridges.

Presses:
Dillon 1050 dedicated to loading 223
Dillon 1050 dedicated to 9mm
Dillon 650 dedicated to processing 223 brass (modified RCBS lube die, dillon trimmer on that one)
Dillon 650 for medium volume loading of about half a dozen other cartridges such as 38/357, 40/10, 45, 308/30-06 blasting ammo etc...
3 Dillon 550's that can run any of about a dozen dedicated toolheads plus some extra "floater" toolheads for cartridges that don't get dedicated toolheads.
Dillon 450 for case forming work.
All the 650's and 1050's have casefeeders of course
Texan turret press for whatever
Pacific 007 single stage press
Lee classic cast single stage press (for 50bmg, but it's really too short)
CH Tool H press (50bmg file-type trim die)
Neil Jones Custom arbor press for use with Wilson hand dies (308, 260, 243, 22-250 and 222)
RCBS partner (lightweight aluminum single stage) to take to the range for development work

Powder measures and scales:
About a dozen Dillon powder measures for the progressives
RCBS chargemaster combo for precision rifle loading
Denver Instrument scale for calibrating check weights and various tasks requiring extreme accuracy
Pact BBK to take to the range or for sorting bullets/cases by weight
Dillon beam balance scale works without batteries or power
Lyman 55 powder measure to take to the range

Case cleaning and prep:
two large dillon tumblers
one large media separator
2 Midway tumblers (1 for small batch cleaning, one for moly coating bullets)
Various other midway media separators
Dillon case trimmer mounted on the 223 case prep 650

[Santa Cruz Armory]

Mostly Lee & RCBS

I'm set for components, I just need to find time to reload. Any one have a used Dillon 650 they want to part with?

Crappy cell phone pic:

[abber]

reply to xxdabroxx

abber, what scale is that, and how do you like it? Approx cost? I need to get rid of the old balance beam lee scale.
02-18-2009 12:50 PM

That's an RCBS 750. I think I paid about 100 dollars for it through Midway. Nice little scale. It comes with a power supply, but it will also run on a 9 volt battery. Oh, and I just love it! Loaned the beamer to a friend, and haven't asked for it back.