Unconfigured Ad Widget

Collapse

Reloading GECO Cases

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dragginpanda
    Senior Member
    • Jul 2014
    • 521

    Reloading GECO Cases

    Has anyone tried reloading GECO pistol cases?

    If so, what are your thoughts?
  • #2
    sbsyncro
    Senior Member
    • Dec 2014
    • 579

    Reloading GECO Cases

    I've got one reload on about 50 of them in 7.62x39 and no problems with them so far. Primers punched out easily and they were reasonably consistent in terms of size and weight.
    sigpic

    Comment

    • #3
      OzzieDoc
      Junior Member
      • Aug 2009
      • 48

      No problems in 9mm either.

      Comment

      • #4
        McGuiver
        Senior Member
        • Feb 2016
        • 1022

        No problems with 38spl brass.


        Sent from my iPad using Tapatalk

        Comment

        • #5
          mofo1111
          Member
          • Apr 2010
          • 250

          No issues reloading them in 9mm. I would not use them for hot or max loads though. For plinking loads they are fine.

          Comment

          • #6
            OzzieDoc
            Junior Member
            • Aug 2009
            • 48

            Originally posted by mofo1111
            No issues reloading them in 9mm. I would not use them for hot or max loads though. For plinking loads they are fine.
            Any reason for this statement.

            All the Geco brass I have is premium quality. I never encountered the small flash hole issue but there is some specialist LE ammunition out there that is berdan primed.

            RUAG owns Geco, RWS, Dynamit Nobel and Rottweil.

            This is not some hick operator.

            Comment

            • #7
              Boris_LA
              Junior Member
              • Jan 2011
              • 65

              I have read before that Geco brass is made by Norma. Excellent brass that I use for load development and as a reference loads. Primer pockets also stay tight longer that many other commercial brass.

              Comment

              • #8
                OzzieDoc
                Junior Member
                • Aug 2009
                • 48

                Originally posted by Boris_LA
                I have read before that Geco brass is made by Norma. Excellent brass that I use for load development and as a reference loads. Primer pockets also stay tight longer that many other commercial brass.
                RUAG also happens to own Norma.

                Comment

                Working...
                UA-8071174-1