I am considering a wet tumbler for cleaning brass. From what I have read this seems to be the most efficient method, although there are a few draw backs. Drying the brass is one. I have no desire to put wet brass in my oven or clothes dryer. So I am hoping to hear more suggestions from those of you who have found the "perfect" way to dry brass. Thanks.
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Drying Brass
Collapse
X
-
Let it dry naturally. Leave it in the house or have a fan blow on it
Sent from my ZTE A2017U using Tapatalksigpic
#ifyourhandtouchesmetalI swearbymyprettyfloralbonnetIwillendyou -
Buy a cheap toaster oven: https://www.amazon.com/BLACK-DECKER-...ter+oven&psc=1
225 degrees for 30-45 minutes dries nearly everything.Comment
-
Buy a small opening (netting) laundry bag, put it in there and add it to a load of socks/underwear in the dryer.
Sorry, not sorry.
🎺

Dear autocorrect, I'm really getting tired of your shirt!Comment
-
If you get a food dehydrator, then you can dry brass with it. There's a good Harbor Freight video that shows their dehydrator drying brass.
I guess if you clean it very well, then you can actually make jerky with it too.
I myself use the Frankford Arsenal brass dryer. I give it 5 stars out of 5 stars. That machine is awesome.
The brass dries quickly, it holds a lot of brass, and you can adjust the temperature settings with exact numbers. Some dryers just say hi -low, or similar.
I can dry about 500 9mm brass cases at one time easily. Plus, the dryer has stackable trays, so I can dry calibers seperately. It's a great machine.Comment
-
Roll 200 cases in a towel. Let stand for 10 hours (in Southern California). Bingo!Comment
-
Food dehydrator.Anchors Aweigh
sigpicComment
-
Mine loses a lot of water rolling it in a big bath towel, then it's into the oven at it's lowest setting, which for me is 170F. If you run it up to 220 you will get boil off spots on the brass. That's been my experience. I leave it in for 45 min.sigpic

Bob B.
(\__/)
(='.'=)
(")_(")Comment
-
My wife is one of those enlightened souls who actually suggested using the washer to wash my brass. I declined because I'm not sure how much contamination it would leave behind. I'm also not going to put wet brass in the clothes dryer, but more because of the beating it might take than any worry about contamination.I have no desire to put wet brass in my oven or clothes dryer.
I dry brass in our oven by putting a few handfuls in each of several aluminum pie crust tins and then baking at 215 degrees for about 20-30 minutes. The temperature is more than high enough to boil water at 6000 feet where I live but well below the roughly 400 degree annealing temperature that would soften the case heads. I'll run the pie tins through the dishwasher periodically to minimize any contamination potential but lead particles in any game I shoot would be a bigger worry.
I'm not quite sure what your concern is with using the oven because you'll be drying brass that is clean and virtually free of lead and other contaminants.Comment
-
when i used to wet tumble i used to dunk mine in a isopropyl alcohol bath, just dunk, shake, and have i fan hit them, and they would be dry within 10 to 15 minSpikes Honey Badger 300 blk
Spike Spartan 556
Spikes Punisher 556
Sig SP2022 9mm
Kahr CW9
Cricket 22lr in pink
Ruger 10/22 take down
Aero precision 308
Spikes Snowflake 224 ValkyrieComment
Calguns.net Statistics
Collapse
Topics: 1,870,804
Posts: 25,176,182
Members: 358,862
Active Members: 5,396
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 27093 users online. 142 members and 26951 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.



Comment