Hornady lnl AP Case Guide 3D model

[1911nut]

Hi:

I have a Hornady lnl ap press and was having issues with 9mm cases falling off the Sub Plate when using the Hornady Case Feeder. I made serval adjustments but never like the timing of the case dropping when the case wasn't falling off the Sub Plate.

I called Hronady customer service, and their solution was to change the timing. So I came up with this design

A piece of folded tape works just as well, but here is an excuse to print something on your 3D printer. Or maybe a project that might get you into 3D printing.

Feel free to modify this design anyway you see fit.

Have a great day!

Also check out what this ebay seller is doing. Pretty simple stuff but very effective.

[Jmoreno88]

For those that don't have a 3d printer you can use an empty shotgun hull. Cut off the brass end and cut the notch. The crimped end (that's now opened after being shot) fits perfectly onto the drop tube. Have ran thousands of rounds with mine with no problems

Sent from my SM-G928V using Tapatalk

[Victor Cachat]

Or use PVC if you have the right size:

http://www.calguns.net/calgunforum/showthread.php?p=19699694#post19699694