RL 550B

[Peloncito]

I need some advice on a Dillon RL550B that I received from a friend. I sent it into Dylan for refurbishing. They returned it to me with everything I needed except for the auto priming and auto powder systems. The website shows the auto powder system as being the same as the one for the 650, I think. I can't figure out which priming system I would need to order. I plan to reload 9 mm.

I have attached photos of what I have.

[bubbala]

Looks like you've got most of the priming system on there. You might need the tubes that go inside the black vertical one, large and small primers. And another shuttle of a different size than what's on there.
calling Dillon should answer all your questions, really.

[Peloncito]

OK, so I think I see what you're saying. I think I was seeing the early warning system in pictures and thinking that was part of the stock priming system. Forgive me as I'm a total noob. So then basically, I just need the primer tubes, the dies, the powder assembly, and any other doodads I want to add to spend more money...

[m16]

Your priming system is there.

You need the primer magazines (small or large) and the corresponding primer pick up tubes.

If you are referring to the little blue box that sits on top, that is the low primer warning indicator.

In addition to the dies, you will need the matching caliber conversion kits for the 550 presses.

You really should read the manual, I'm assuming they sent you an updated manual since you had it refurbished.