Well I really don't have a question, I just wanted to say thank you to everyone out there that helps the new guys. I have gotten good info on this forum, 1911, S&W, firingline and many others.
The with got me a Lee ClassiC Turret Press kit for Xmas and last night I shot the first batch of 9mm and 45 ACP off with out issue.
I thought I would give a little feed back as a new shooter.
1) Powder selection was the hardest. There are so many options. I settled on starting with Power Pistol. The issue I have with PP is that it was not listed in the documentation I had all that much for the bullets I selected. Thankfully there is a wealth of load data out there that people have shared. PP seemed to have a wide range of load data. I select a starting point for both 9mm and 45 acp that I would consider full power but with head room from the Max. The recoil was snappier than range ammo but not over powering and I was getting a good amount of flash.
2) The Lee Auto drum is cool and I like it but I was hoping for a little more accuracy. I would get charges +- .2 grs sometimes when testing it. Most of the time it was dead on, but I did get outliers.
3) The safety prime system likes working with large primers much more than small. I also had a lot of primers going in sideways and upside down in the beginning. I think the press and me both smoothed out and things started to settle down.
4) Check you OAL not only in your chamber but your mags as well. I select an OAL on the longer side to give me a lesser chance of an over pressure. The rounds dropped right into the barrel with it removed from the gun. I got to the range an they where just short enough for me to get about 5 rounds into a Wilson 8 round mag. After 5 rounds they started binding and dragging at the tip of the bullet. Other than that they functioned great.
5) Primers are hard to find local. I am not ready to buy in bilk but will soon. I had to hunt them down. I wiped the local Bass Pro shop out.
6) I can't say enough good things about ACME Bullet company. Nice product, great prices, cool packaging and fast shipping.
7) I am impressed with the Lee gear. You can tell it is built "Good Enough", which I think is great. It allowed me to get into the hobby and learn. I am sure I will be getting a progressive in the future, I will be looking at the load master as will as others.
I am sure I will think of others but I just wanted to share and say thank you.
The with got me a Lee ClassiC Turret Press kit for Xmas and last night I shot the first batch of 9mm and 45 ACP off with out issue.
I thought I would give a little feed back as a new shooter.
1) Powder selection was the hardest. There are so many options. I settled on starting with Power Pistol. The issue I have with PP is that it was not listed in the documentation I had all that much for the bullets I selected. Thankfully there is a wealth of load data out there that people have shared. PP seemed to have a wide range of load data. I select a starting point for both 9mm and 45 acp that I would consider full power but with head room from the Max. The recoil was snappier than range ammo but not over powering and I was getting a good amount of flash.
2) The Lee Auto drum is cool and I like it but I was hoping for a little more accuracy. I would get charges +- .2 grs sometimes when testing it. Most of the time it was dead on, but I did get outliers.
3) The safety prime system likes working with large primers much more than small. I also had a lot of primers going in sideways and upside down in the beginning. I think the press and me both smoothed out and things started to settle down.
4) Check you OAL not only in your chamber but your mags as well. I select an OAL on the longer side to give me a lesser chance of an over pressure. The rounds dropped right into the barrel with it removed from the gun. I got to the range an they where just short enough for me to get about 5 rounds into a Wilson 8 round mag. After 5 rounds they started binding and dragging at the tip of the bullet. Other than that they functioned great.
5) Primers are hard to find local. I am not ready to buy in bilk but will soon. I had to hunt them down. I wiped the local Bass Pro shop out.
6) I can't say enough good things about ACME Bullet company. Nice product, great prices, cool packaging and fast shipping.
7) I am impressed with the Lee gear. You can tell it is built "Good Enough", which I think is great. It allowed me to get into the hobby and learn. I am sure I will be getting a progressive in the future, I will be looking at the load master as will as others.
I am sure I will think of others but I just wanted to share and say thank you.

Comment