Unconfigured Ad Widget

Collapse

Reloading 308

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • davek8s
    Senior Member
    • Jan 2011
    • 2014

    Reloading 308

    I just jailed a Ruger American in 308 and while she's locked up I want to start getting my supplies together. I already have powder and primers. I reached out to some sellers in the sale section for brass.

    What's a good bullet weight for a 1 in 10" twist barrel? I've read that 168 grain works really well for some people.

    The main use of this rifle will be shooting paper at 100-200 yards.
  • #2
    baih777
    CGN/CGSSA Contributor
    CGN Contributor
    • Jul 2011
    • 5680

    168
    Been gone too long. It's been 15 to 20 years since i had to shelf my guns. Those early years sucked.
    I really miss the good old Pomona Gun Shows.
    I'm Back.

    Comment

    • #3
      jimmykan
      Veteran Member
      • Jan 2008
      • 3105

      10 twist barrels in 308 can shoot 190 grain bullets no problem.

      The below Berger Twist Rate Stability Calculator allows you to identify what the optimal twist rate and the marginal twist rate is for any given bullet given your shooting conditions. This tool allows you to figure out which bullets will stabilize out of your rifle given your rifle's twist rate. This tool also helps you


      Here is a cool online calculator that helps determine whether your barrel will stabilize a bullet in the given conditions.

      Comment

      • #4
        milotrain
        Veteran Member
        • Apr 2011
        • 4301

        Originally posted by davek8s
        308
        What's a good bullet
        The main use of this rifle will be shooting paper at 100-200 yards.
        You don't really need any of the 308 heavies out to 200 yards so anything up to a 168 is a good idea although the 1:10 should stabilize all the way up to the 190SMK depending on your barrel length and how fast you run the bullet.

        The 168 SMK, and the 135 SMK are both excellent bullets although the 135 may or may not work with the chamber. You don't pick a bullet to match twist you pick a bullet to match chamber and needed distance. For 100-200 yards on paper that's the 135SMK, 155SMK (2155), and the 168SMK. Nosler makes a 155 and 168 that should be good, the Hornady 168 Amax might be good but might be a dog, depends on the chamber. Lapua's 167 scenar is nice, and the 185gr D46 should stabilize just fine but is a really old school design for the high price asked.

        See if you can find a common theme in other Ruger American 308 shooters. If the majority like a certain bullet then go with that. The 168 is notoriously jump tolerant as well as consistent.
        weg: That device is obsolete now. They replaced it with wizards.
        frank: Wait a minute. There are more than one wizard? Is [are?] the wizard calibrated?

        Comment

        • #5
          kcstott
          I need a LIFE!!
          • Nov 2011
          • 11796

          168gr as mention is Ideal out to 600 meters max. you'll need a 175 gr to go further, but if you plan on just shooting paper 100-200 yards use a 155gr SMK Palma for really accurate loads

          Comment

          • #6
            davek8s
            Senior Member
            • Jan 2011
            • 2014

            Thanks guys. I usually try to stick with common bullet weights for my reloads. I'll probably start with the 155 and 168 grain bullets.

            Comment

            • #7
              mark501w
              Senior Member
              • Apr 2011
              • 1699

              110_125gr sierras 50 gr 748 ball , same case , same primer. Reduce for starting load 10%.

              Comment

              • #8
                fx1974
                Member
                • Apr 2014
                • 438

                From my experience, the 1:10 twist will still stabilize 150 grainers but you cannot push them out to max load and still be accurate. It may depend on the bullet profile though. For 200 yards, I don't think that would be a problem.

                Accuracy at max loads has been more achievable with heavier bullets (165+) and slower powders.

                I also had very good results with H4895 + 150gr Hornady FMJs... reduced loads are very accurate even with the cheap bullets. On good days I would have a 3" bulls eye at 200 yards and each round on a 20-rd string is within target. Rifle heats up fast though so rate of fire is slow.

                Comment

                • #9
                  Top Cat
                  Member
                  • Oct 2004
                  • 105

                  There is a lot of myth and mis-information out there regarding barrel twist, that may be third hand information and not from experience.

                  But to make it simple, a 10 twist 30 cal will stabilize any bullet from 125-225gr and shoot them accurately if the ammo is good and the barrel is a high quality barrel to start with.

                  The 168gr bullet is not as streamlined as the newer design bullets, so it is less difficult to find a good load for it.

                  Out to 600 yards the 168gr SMK will shoot very well, and still be stable past that range...out to 800-900 yards at least. It won't quite make it to 1000 yards out of a 308 though and stay supersonic.

                  But then the 168gr bullet was not originally designed for that range.

                  The 155 gr Palma bullet was designed for 1000 yd Palma Match shooting because it will stay supersonic out to 1000 yards, but that is from Palma barrels and they are 30" long.

                  The 175 gr bullet was designed to be supersonic at 1000 yds from a 308 out of standard length military rifle barrels.

                  The 168 will be easier to find an accurate load for than the 155gr or the 175gr and might shoot better at 300 yards, depending on your load and rifle.

                  With good ammo, and a load that is tuned for your rifle, the accuracy difference between any of them at 200-300 yards will not be a big difference.

                  Comment

                  • #10
                  • #11
                    JMP
                    Internet Warrior
                    CGN Contributor - Lifetime
                    • Feb 2012
                    • 17056

                    For 100-200 yards, it's very hard to beat the old 168 SMK. I've tried newer fancier bullets, but for short to intermediate range, I use nothing but 168 SMKs. They are just really forgiving and seem to shoot well in almost all 308s.

                    Comment

                    Working...
                    UA-8071174-1