Unconfigured Ad Widget

Collapse

Breaking down your reloading time

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #46
    lostinsurf
    Member
    • Feb 2011
    • 125

    Yep, my 550b setup and tune is what consumes the most time. 100 to 1

    I do not think I am an average reloader.

    I don't make hundreds of the same round. I make 18 and then reset. Incrementing powder, different bullet lengths/seating depths, and crimping positions causes (3) die changes for almost every new recipe.

    I've got 10 powders and a dozen different bullets for each caliber. I try to start powder weight low and make five 1/2 grain increments up to max. That's over 600 (10x12x5)different combo recipes for each caliber. I've made about 300 recipes so far. I reload for 7 calibers. (7 X 600)

    I use a marker on a couple of the cases to write the recipe. I use the Home Depot divided plastic case to keep lots separate.

    I reload 38, 357 mag, 357 max, 44, 44 mag, 45 acp, and 45 colt.

    I try to make 18 rounds of each recipe. I shoot 6 rounds for a group size thru the chrono in my "Reference Revolver" (RR) and enter into a comprehensive log (Excel). My RR for each caliber usually has 8"+ barrel and scope. I save the other 12 rounds for different revolvers.

    I try to maintain a few samples of every recipe for future reference. I have made up a couple of hundred rounds with a recipe I knew would shoot 1/2" groups cleanly.

    So after hundreds of recipes, I can only state what each recipe does in my RR. I have found that really great loads in the RR does not always mean small groups in other guns. We all know that each gun has its own preferences.

    I have many, many revolvers which would take years and years to make rounds, shoot, and record for each one. I have a hobby that I can not complete in my lifetime. I love it.

    I have never been this obsessive compulsive about anything. Can you tell?

    Comment

    Working...
    UA-8071174-1