Tweet
My 2-cents
Get a good single stage. The Lee "Reloader" is cheap but I'd rather go with the Lee Classic Cast or at the very least, if it must be Lee, the Challenger.
For a used press look for an RCBS, Redding, or Lyman.
Get carbide dies. Lee carbide dies are fine and a good value.
Everyone has their favorite powder measure. I've got an old RCBS Uniflow. YMMV. For pistol calibers, you want the small rotor.
Digital scales have their own set of problems but use what you feel comfortable with.
Calipers are a necessity.
You can make your own loading blocks with an electric drill and scrap lumber. Needing a kinetic bullet puller is inevitable. Frankfort Armory are cheap and hold up well. The "O" rings wear but you can get spares from the hardware store.
If you eventually want to reload more ammo faster, then look to adding a Dillon or perhaps a turret. I think you'll find that there's always going to be a use for a good single stage press in your reloading repertoire.
Stay safe!
Get a good single stage. The Lee "Reloader" is cheap but I'd rather go with the Lee Classic Cast or at the very least, if it must be Lee, the Challenger.
For a used press look for an RCBS, Redding, or Lyman.
Get carbide dies. Lee carbide dies are fine and a good value.
Everyone has their favorite powder measure. I've got an old RCBS Uniflow. YMMV. For pistol calibers, you want the small rotor.
Digital scales have their own set of problems but use what you feel comfortable with.
Calipers are a necessity.
You can make your own loading blocks with an electric drill and scrap lumber. Needing a kinetic bullet puller is inevitable. Frankfort Armory are cheap and hold up well. The "O" rings wear but you can get spares from the hardware store.
If you eventually want to reload more ammo faster, then look to adding a Dillon or perhaps a turret. I think you'll find that there's always going to be a use for a good single stage press in your reloading repertoire.
Stay safe!
Comment