I'm trying to reload some 30-06 on my dillon 550 but can't seem to get my sizing die set right. I got it set up on some Remington brass and it was good on the case gauge, but when I started using some Hxp surplus brass it was way out of spec (too long). So I cranked the sizing die down enough to get the hxp into spec and now it sizes the Remington too short on the gauge. Am I crazy or do I have to reset my die for every different lot of brass I'm using?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Different brass different die setting?
Collapse
X
-
Different brass different die setting?
"But mainly democrat voters would still vote Democrat if they elected Satan himself who ate babies as they came out of mother's wombs and killed people in the street. They hate republicans that much and are in that level of denial about what their party is about. They just simply can't handle the cognitive dissonance...." -SkilletboyTags: None -
I don't use a progressive press but I can see that happening . Have you shot the surplus brass out of the same gun the Rem brass was shot in . If so do a water volume test . My thinking is the surplus brass is thicker and is resisting the sizing more then the Rem brass . I'm assuming you're only talking .003 to .006 difference or so HTD ( Head to Datum ) . Your press/shell plate may be deflecting/flexing more when sizing the harder to size surplus cases . Maybe more or better lube could help But yea I had to do that with my 308 cases before I got a set of competition shell holders when using a single stage .Tolerate
allow the existence, occurrence, or practice of (something that one does not necessarily like or agree with) without interference.
Anyone else find it sad that those who preach tolerance CAN'T allow the existence, occurrence, or practice of (something that they do not necessarily like or agree with) without interference.
I write almost everything in a jovial manner regardless of content . If that's not how you took it please try again
-
You did not measure the length of the cases from the shoulder to the case head before sizing the Remington or the HXP. You assumed both lots of brass were fired the same number of times and you assumed both lots of cases were fired in the same type rifle as in semi auto or bolt gun.
The case has resistance to sizing, some cases have more resistance to sizing than other cases. To overcome the ability of the case to resist sizing the reloader must take advantage of the threads in the press and on the die. There are times the case has more resistance to sizing than the press can overcome; when that happens the press flexes.
So the next time you want to know if the case got sized/returned to minimum length measure the gap between the bottom of the die and top of the shell holder before lowering the ram.
And then there are cases that have been fired in machine guns.
F. GuffeyLast edited by fguffey; 08-23-2016, 6:37 AM.Comment
-
Yes, different brass can and will require you to adjust your die.
PGComment
-
"But mainly democrat voters would still vote Democrat if they elected Satan himself who ate babies as they came out of mother's wombs and killed people in the street. They hate republicans that much and are in that level of denial about what their party is about. They just simply can't handle the cognitive dissonance...." -SkilletboyComment
-
Thanks guys. That's pretty much what I thought especially because I have heard that the HXP is a thicker stiffer brass and it was fired from a different rifle."But mainly democrat voters would still vote Democrat if they elected Satan himself who ate babies as they came out of mother's wombs and killed people in the street. They hate republicans that much and are in that level of denial about what their party is about. They just simply can't handle the cognitive dissonance...." -SkilletboyComment
-
Now the issue that I'm having is that when I'm resizing the HXP I'm having some that the headspace is too long and some that the headspace is too short even though I haven't changed the setting. Is this normal?"But mainly democrat voters would still vote Democrat if they elected Satan himself who ate babies as they came out of mother's wombs and killed people in the street. They hate republicans that much and are in that level of denial about what their party is about. They just simply can't handle the cognitive dissonance...." -SkilletboyComment
Calguns.net Statistics
Collapse
Topics: 1,870,888
Posts: 25,177,197
Members: 358,862
Active Members: 5,395
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 34100 users online. 129 members and 33971 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment