Unconfigured Ad Widget

Collapse

question about reloading hollow points

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bruce3
    Senior Member
    • May 2008
    • 1249

    question about reloading hollow points

    i recently received some 9mm 115gr HP bullets and was wondering if i reload them according to 9mm 115gr FMJ data. i reload 9mm 115gr FMJ all the time so do i just work my way up from 90% of max charge using HP with FMJ data?
  • #2
    Captain Evilstomper
    Senior Member
    • Sep 2008
    • 775

    i would reload them exactly the same as FMJ, except that ou may have to adjust the seating depth to account for a different bullet profile, but other than that it's exactly the same
    BTW what are you reloading them for?
    what purpose? target match? HD?
    Reason has seldom failed us because it has seldom been tried

    Better a cruel truth than a comfortable delusion
    -- Edward Abbey

    Comment

    • #3
      Bruce3
      Senior Member
      • May 2008
      • 1249

      well someone who got out of reloading decided to give them to me, i just plan to use them as plinking ammo maybe use some for HD until i get some commercial HD ammo.

      Comment

      • #4
        Captain Evilstomper
        Senior Member
        • Sep 2008
        • 775

        i'd start a little lower than 90% ,because it'll shorten the life of your brass...
        Reason has seldom failed us because it has seldom been tried

        Better a cruel truth than a comfortable delusion
        -- Edward Abbey

        Comment

        • #5
          BamBam-31
          CGN/CGSSA Contributor
          • Dec 2005
          • 5318

          Just go to Hodgdon's website (www.hodgdon.com) for good info. They give you starting and max loads for a wide range of bullets. Here's the 115 gr. Speer Gold Dot HP's (loaded to 1.125" OAL):

          115 GR. SPR GDHP IMR 700-X .355" 1.125" 3.9 991 26,000 PSI 4.2 1091 31,900 PSI
          115 GR. SPR GDHP Hodgdon Longshot .355" 1.125" 5.0 1127 29,000 PSI 6.0 1203 32,300 PSI
          115 GR. SPR GDHP Hodgdon HS-6 .355" 1.125" 6.7 1171 26,700 CUP 7.0 1234 29,400 CUP
          115 GR. SPR GDHP Winchester AutoComp .355" 1.125" 5.1 1078 28,200 PSI 5.6 1161 32,500 PSI
          115 GR. SPR GDHP Hodgdon Universal .355" 1.125" 4.5 1029 27,400 CUP 5.0 1149 31,200 CUP
          115 GR. SPR GDHP Winchester 231 .355" 1.125" 4.7 1075 25,300 CUP 5.1 1167 28,100 CUP
          115 GR. SPR GDHP Hodgdon HP-38 .355" 1.125" 4.7 1075 25,300 CUP 5.1 1167 28,100 CUP
          115 GR. SPR GDHP IMR SR 7625 .355" 1.125" 4.5 1031 28,000 PSI 4.9 1113 32,300 PSI
          115 GR. SPR GDHP IMR PB .355" 1.125" 3.6 957 28,300 PSI 4.0 1038 32,000 PSI
          115 GR. SPR GDHP Hodgdon Titegroup .355" 1.125" 4.5 1135 29,500 CUP 4.8 1158 30,500 CUP
          115 GR. SPR GDHP Hodgdon Clays .355" 1.125" 3.7 1066 30,900 CUP 3.9 1095 32,600 CUP

          IIRC, I load my Zero 125 gr. JHP's to 1.125" w/ 4.3 gr. of Win 231. A bit softer shooting than the 4.7 gr. starting load given above for the 115 gr. bullet, but it's just a plinker load, eh? All I have to do is make Power Factor.
          sigpic

          Comment

          Working...
          UA-8071174-1