Just got a brass tumbler, and walnut media (will be switching to corncob) have been reading a lot about this stuff here, the bottle of media says add brass polish. I have read a lot about people saying they just use the walnut, or corncob media. I'm not sure what is best to do here any advice will help.
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Brass tumbling
Collapse
X
-
For me, the polish is like wax on the car...protects the finish and the waxed brass seems to clean better after firing..... -
Buy some nupolish car POLISH. Then drip in some (like half a teaspoon) into the bowl, and spread it around in a thin layer THEN put your walnut (which is fine) media into the bowl, then toss in your brass and go at it. You want the polish in there, but do NOT just drip it on top of the walnut or it will clump up instead of spreading out and you'll get clumps of media inside the cases. By dripping it onto the bowl first, you stick it to the bowl and the media gets coated as it comes in contact ... but not in a big lump.
Brass comes out shiny! If it weren't for the dust, I'd still use my dry tumbler for the bulk of my brass "cleaning", but I do wet tumbling, partly because I pickup brass from outdoor ranges which comes with a lot of dirt.==================
sigpic
Remember to dial 1 before 911.
Forget about stopping power. If you can't hit it, you can't stop it.
There. Are. Four. Lights!Comment
-
I use the additive from Midway.
One of the best things you can do is cut up a used static free dryer sheet into 4 pieces and put that in with each load of brass. Replace each time. The media will last longer and not leave a coating of dust etc on the brass.A 30cal will reach out and touch them. A 50cal will kick their butt.
NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society memberComment
-
I use the Lyman Walnut media that is red.
I assume that it has red rouge in it for polishing.
It works great but will ultimately start caking up in the tumbler bowl after awhile.
I still use it.
Another tip is to put some clothes dryer "Bounce" pieces in the mix to absorb any dust from the tumbling.Comment
-
The Lyman "red" media is treated walnut, the "green" is treated corncob.
If you're going to use dryer sheets, make sure to use "used" one. Using new dryer sheets also cause a build up...because the journey is the worthier part...The Shepherd's TaleComment
-
Check my previous posts. Just reptile bedding "walnut" dryer sheet and basso, But very little. If 40 or larger it even cleans The inside of he casesreloading is like building tiny rocket ships. and testing how well they fly (or dont).Comment
-
I use walnut lizard bedding and 2 caps of Nufinsh car polish. I let it run for about an hour to make sure the wax is good and worked in before I add brass. When it starts to hit the 3 hour mark to get a good polish, I swap out the mix. Learned a new thing about the dryer sheet.
Comment
Calguns.net Statistics
Collapse
Topics: 1,870,884
Posts: 25,177,114
Members: 358,862
Active Members: 5,395
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 27817 users online. 48 members and 27769 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.


Comment