Unconfigured Ad Widget

Collapse

corrosive ammunition

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sgtb
    Junior Member
    • May 2008
    • 37

    corrosive ammunition

    how bad is corrosive and semi-corrosive ammunition for weapons?

    does it only affect weapons that arent cleaned after every use?

    I have been looking for 7.62 ammo at a decent price in bulk. However, most of the stuff that comes up is yugo 'semi-corrosive'...

    thanks in advance
  • #2
    50 Shooter
    Senior Member
    • Oct 2005
    • 1653

    If you knowingly shoot corrosive ammo and don't clean it, the rust and pitting you end up with is your own fault.

    All you need to do is run some hot soapy water over the parts that the corrosive salts came into contact with. Then clean the rifle as normal and everything will be fine. Another thing you can do is bring a bottle of Windex with ammonia in it with you to the range. Before you leave spray some on a couple patches and run them down your barrel.

    That way when you get home you can finish cleaning it, like I said, clean every part that the primer residue can contact.
    50 BMG Shooters http://50-bmg.com/forum/index.php

    Comment

    • #3
      f4tweet
      Senior Member
      • Oct 2005
      • 2022

      Skip anything corrosive. Not worth the trouble.

      Comment

      • #4
        gunrun45
        Senior Member
        • Oct 2006
        • 2018

        corrosive ammo is not that bad once you get into the grove on how to clean things.
        Its not even that hard. At the range after you are done shooting just spray some windex down the barrel and on the bolt face. They when you get home THAT DAY send a windex damp patch down the bore and clean as usual. The amonia in the windex cleans out the salts left behind on the bore.

        Personally, I only use corrosive ammo in chrome lined bore weapons and then its only in my "shooters" and not in my collectors.

        Now that I reload a lot I don't shoot much corrosive ammo unless its 7.62x54 russian stuff out of my old beater bubba'ed mosin nagant or 7.62x25 tak stuff (ery cheap) out of my CZ's
        Murphy's Law - What can happen will happen at the least opportune moment

        Comment

        • #5
          Ironchef
          Senior Member
          • Nov 2007
          • 2313

          Originally posted by f4tweet
          Skip anything corrosive. Not worth the trouble.
          It's no trouble. Most people understand how rust works..it's not a process that'll eat your bore in the least unless left for a couple days or more. The only difference with corrosive ammo vs. non-corrosive is that yes, you actually have to clean your weapon after shooting (within a day or two max). If you're one of those bums that don't clean at all, then no, corrosive ammo is not for you.

          People tend to think corrosive ammo means it's an active acid that starts burning through your bore like little pacmen. If you realize that on a milsurp rifle, it's almost certain that your rifle was using corrosive ammo many decades before you got it and they probably didn't clean it well and you still have a somewhat shiney bore. I know my mosin nagant 91/30 was used in WWII and I'm guessing it wasn't washed or treated with windex or hot soapy water...ever. It was probably packed in cosmoline where the preservative might have cancelled out the oxidation process until CAI imported it and removed most of the cosmoline and shipped it off to Big5 for me to pick up in 2008. So no, if I used 100 rounds of corrosive Bulgarian ammo from 1954 through it and don't get to clean the bore for 24 hours, I doubt I"m doing any measurable damage during that time.
          Fleeing the PRK on 3/8/09!!

          Comment

          • #6
            sorensen440
            Calguns Addict
            • Mar 2007
            • 8612

            I don't mind it at all
            It adds one step to the cleaning

            When I'm done shooting corrosive I spray Windex down the barrel and wait 5 minutes... that's it nothing difficult.
            "I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it." - Thomas Jefferson

            Comment

            • #7
              vwynn
              Member
              • Dec 2008
              • 383

              whats Cosmolines?
              Those who ignore... Will be ignored.

              Comment

              • #8
                762cavalier
                NRA Training Counselor
                CGN Contributor
                • Oct 2005
                • 3626

                another thing. There is no such thing as "semi-corrosive". thats like being semi-pregnant. It either is or it isn't.

                I have gone through thousands of rounds of Corrosive ammo in a mosin and a mauser. Just clean at the range with windex, or warm soapy water and clean as usual when you get home. I have had 0 rust issues.
                In any type of fight, & especially gun fights, there are no winners ..... just varying degrees of losers. The only fight you win is the one you never get into.

                sigpic
                NRA Certified Instructor
                Rifle, Pistol, Shotgun, Home Firearms Safety,Muzzleloading, Personal Protection Series, Chief Range Safety Officer, Refuse to be a victim Regional counselor

                Comment

                • #9
                  sorensen440
                  Calguns Addict
                  • Mar 2007
                  • 8612

                  Originally posted by vwynn
                  whats Cosmolines?
                  Cosmoline is a type of storage grease that you typically find on surplus rifles
                  "I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it." - Thomas Jefferson

                  Comment

                  • #10
                    sgtb
                    Junior Member
                    • May 2008
                    • 37

                    Originally posted by 762cavalier
                    another thing. There is no such thing as "semi-corrosive". thats like being semi-pregnant. It either is or it isn't.

                    I have gone through thousands of rounds of Corrosive ammo in a mosin and a mauser. Just clean at the range with windex, or warm soapy water and clean as usual when you get home. I have had 0 rust issues.
                    haha i had the same thought when i saw the ammo advertised as that.


                    thanks for all the info guys.

                    Comment

                    • #11
                      motorhead
                      Veteran Member
                      • Jan 2008
                      • 3409

                      on ak's (except yugo) the chamber and bore are chrome. this is because most combloc ammo is corrosive. it'll still foul/eat your gas system if you don't clean but it's not considered a big deal. clean every trip. or not, just keep a spare gas tube and piston around.
                      sigpic Sic gorgiamus allos subjectatos nunc

                      Comment

                      • #12
                        rayra
                        Banned
                        • Mar 2006
                        • 1747

                        It's as if most people read the word 'corrosive' and immediately think of cartoonish vats of bubbling acid. Stupid. The primer compounds in 'corrosive' ammo depost a salt as part of the powder residue in your barrel, action and gas system. If you fail to clean the weapon, the salt reaily bonds with atmospheric moisture, thus putting water in contact with your preciousss. That's all it is.
                        Clean your weapon thoroughly / properly after each use of such ammo and you'll have no problem at all.
                        And meanwhile, enjoy access to and the affordability of the 'corrosive' ammo that so many nancies fear.

                        Comment

                        • #13
                          JDay
                          I need a LIFE!!
                          • Nov 2008
                          • 19393

                          Originally posted by 50 Shooter
                          If you knowingly shoot corrosive ammo and don't clean it, the rust and pitting you end up with is your own fault.

                          All you need to do is run some hot soapy water over the parts that the corrosive salts came into contact with. Then clean the rifle as normal and everything will be fine. Another thing you can do is bring a bottle of Windex with ammonia in it with you to the range. Before you leave spray some on a couple patches and run them down your barrel.

                          That way when you get home you can finish cleaning it, like I said, clean every part that the primer residue can contact.
                          Ammonia does nothing to prevent corrosion from corrosive primers.
                          Oppressors can tyrannize only when they achieve a standing army, an enslaved press, and a disarmed populace. -- James Madison

                          The Constitution shall never be construed to authorize Congress to prevent the people of the United States, who are peaceable citizens, from keeping their own arms. -- Samuel Adams, Debates and Proceedings in the Convention of the Commonwealth of Massachusetts, 86-87 (Pearce and Hale, eds., Boston, 1850)

                          Comment

                          • #14
                            762cavalier
                            NRA Training Counselor
                            CGN Contributor
                            • Oct 2005
                            • 3626

                            Yes, but the windex with ammonia does help remove some of the copper residue that may be layered over the corrosive salts. Also makes clean up of the barrel a little easier.
                            In any type of fight, & especially gun fights, there are no winners ..... just varying degrees of losers. The only fight you win is the one you never get into.

                            sigpic
                            NRA Certified Instructor
                            Rifle, Pistol, Shotgun, Home Firearms Safety,Muzzleloading, Personal Protection Series, Chief Range Safety Officer, Refuse to be a victim Regional counselor

                            Comment

                            • #15
                              motorhead
                              Veteran Member
                              • Jan 2008
                              • 3409

                              send all corrosive ammo to me for proper disposal. especially 7.62X39, 8mm and .30-06. i am fully trained to safely dispose of this hazardous product.
                              sigpic Sic gorgiamus allos subjectatos nunc

                              Comment

                              Working...
                              UA-8071174-1