Unconfigured Ad Widget

Collapse

Which powder dispenser best?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cpl_dan
    Senior Member
    • Apr 2009
    • 1913

    Which powder dispenser best?

    Looking for a powder dispenser under $100 for 308, 556 and 40 sw using stick powder.
    ehhh
  • #2
    anyracoon
    Veteran Member
    • May 2006
    • 3698

    Find a used RCBS powder thrower. Get the micro adjuster as a add on.

    Comment

    • #3
      AGGRO
      Veteran Member
      • Oct 2009
      • 2793

      Second the RCBS.

      Comment

      • #4
        roc_my_tims
        Senior Member
        • Oct 2011
        • 1522

        people say good things about the redding, pretty pricey though and thebhopper isint that big.

        Comment

        • #5
          milotrain
          Veteran Member
          • Apr 2011
          • 4301

          Start with the Lee Perfect powder measure. It's like $20 but if it throws the powder you like well then it will likely throw it better than any other measure short of the very expensive ones. If it doesn't then you can set it up for whatever you don't care about and not have to constantly convert your good measure.

          If I was going to buy a new measure tomorrow it would be a culver a Redding BR3 or the lyman 55 measure.
          Last edited by milotrain; 05-31-2016, 7:58 AM.
          weg: That device is obsolete now. They replaced it with wizards.
          frank: Wait a minute. There are more than one wizard? Is [are?] the wizard calibrated?

          Comment

          • #6
            rm1911
            Veteran Member
            • Jan 2013
            • 4073

            Which powder dispenser best?

            I've had a hornady for about ever. Works great. I'm not throwing bench rest precision loads. Mostly for the garand so .2-.3 gr variances aren't even noticeable. Only "issue" is with long grain powders like 4895 as you'll feel a kernel or two crunch as you throw the charge. Does it matter? No. Ball powders are no issue.

            If precision matters, throw 1/2 grain short then use a trickler. I don't have the patience
            NRA Life Member since 1990

            They're not liberals, they're leftists. Please don't use the former for the latter. Liberals are Locke, Jefferson, Burke, Hayek. Leftists are progressives, Prussian state-socialists, fascists. Liberals stand against the state and unequivocally support liberty. Leftists support state tyranny.

            Comment

            • #7
              Yerman
              Senior Member
              • Aug 2011
              • 1396

              If you need that much precision, get a trickler. Otherwise, I think any of the modern power dispenser works good.

              Comment

              • #8
                popeye4
                Senior Member
                • Nov 2008
                • 1534

                A Culver is the best, hands down, but you won't get one of those (http://harrellsprec.com/index.php/ca...owder-measures) for under $100. You could probably get an RCBS Uniflow and a powder trickler for right around $100.
                sigpic
                NRA Life Member
                CRPA Life Member

                Comment

                • #9
                  foxtrotuniformlima
                  Veteran Member
                  • Nov 2008
                  • 3459

                  Although it is not in your budget, I have found the Quick Measure to be one of the most consistent measures for stick powders but is very dependent on you being smooth and consistent.

                  I haven't tried a Harrels yet though and would like to as it seems well made and thought out.

                  The only way I get the results I'm looking for is to drop with a cheap-o Lee and trickle in a tuned beam scale. Tedious and time consuming.

                  BTW - I am not obsessive / compulsive nor anal retentive just trying to accomplish something with precision and accuracy.
                  Anyone press will hear the fat lady sing.

                  Originally posted by Vin Scully
                  Don't be sad that it's over. Smile because it happened.
                  Originally posted by William James
                  I cannot allow your ignorance, however great, to take precedence over my knowledge, however small.
                  Originally posted by BigPimping
                  When you reach the plateau, there's always going to be those that try to drag you down. Just keep up the game, collect the scratch, and ignore those who seek to drag you down to their level.
                  .

                  Comment

                  • #10
                    dreyna14
                    Senior Member
                    • Feb 2008
                    • 1594

                    Comment

                    • #11
                      silas3d
                      Member
                      • Apr 2015
                      • 257

                      Originally posted by milotrain
                      Start with the Lee Perfect powder measure. It's like $20 but if it throws the powder you like well then it will likely throw it better than any other measure short of the very expensive ones. If it doesn't then you can set it up for whatever you don't care about and not have to constantly convert your good measure.
                      +1

                      I've had great success with mine throwing trail boss and titegroup. Last trip to the range I chronoed a SD of 7.8 FPS with Trail boss plinking loads for my 45-70. The chronograph doesn't lie!

                      Comment

                      Working...
                      UA-8071174-1