Unconfigured Ad Widget

Collapse

Wolf ammo question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sarki
    Junior Member
    • Oct 2008
    • 77

    Wolf ammo question

    Turners is having a sale on Wolf .223 for $4.95 bx of 20. Now my question is, Being that these rounds are steel casing and not brass, Will steel casings hurt the AR or is it ok?? Thx 4 info.
    sigpic
  • #2
    97F1504RAD
    Calguns Addict
    • Dec 2008
    • 6319

    The steel casings are fine.

    However you need to make certain that if you shoot brass cased ammo after having used the steel that Cleaning the Chamber thoroughly is Mandatory Otherwise you could have issue with cases sticking.

    Other than that you are good to go.

    The WOLF ammo gets a bad rap in my opinion due to this. But if your only shooting WOLF ammo then it is not even and issue.

    I have heard that the WOLF Military Classic is a better round but have not been able to locate any info as to why it is better then the Black Boxed WOLF.

    Comment

    • #3
      sorensen440
      Calguns Addict
      • Mar 2007
      • 8612

      its dirty but it works
      "I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it." - Thomas Jefferson

      Comment

      • #4
        Spyder
        CGN Contributor
        • Mar 2008
        • 17381

        Crap. i'd buy a lot of it for that price... Wish there was a Turners up here. (God, did I just say that?!)

        Comment

        • #5
          USN CHIEF
          I need a LIFE!!
          • Nov 2007
          • 11540

          It is not a screaming deal, but I would buy some. It would be for a lil cheaper than ordering it from an online ammo vender. Stock up on it.
          Originally posted by tankerman
          I think most folks bubba their AR's because they watch too many action movies, play too many video games and don't understand how to socialize properly, so they fantasize about being 'action hero's'. Kind of like little girls playing dress-up.
          Originally posted by Douglas711
          Is everybody stocking up on guys now? Just curious some gun prices seem to be getting high.

          Comment

          • #6
            BKTJ
            Senior Member
            • Nov 2008
            • 797

            The wolf lacquer coated is the problem child. The lacquer comes off at high heat, coats the chamber and fouls the mag lips (on occasion). The newer polymer coated stuff called POLYFORMANCE on some of the Wolf boxes is much better. Polymer will take much more heat and is slicker. I have several Stag and RRA ARs and they feed everything. However, I have a buddy with a Bushy AR and he is lucky to get a full mag to feed.

            TJ

            Comment

            • #7
              sarki
              Junior Member
              • Oct 2008
              • 77

              K thanks guys. I dont know if the ammo that Turners is selling is the polymer coated stuff (dont think it is) but looks like im going to pay Turners a visit in the morning. Not a bad deal for $263 bucks for 1000rds tax included.
              sigpic

              Comment

              • #8
                kato4moto
                Member
                • Dec 2008
                • 332

                IIRC, Wolf discontinued the laquer-coated cases in its line of .223 ammo several years ago precisely to address this complaint. (It had a sort of greenish-grey tint to the case and looked shiny. The polymer-coated stuff has a dull grey hue, which seems to come off a bit on your fingers.)

                Doubtful that a place like Turner's with its stock turnover still has the old ammo in the pipeline. If in doubt, just open the box and check for yourself.

                Personally, I've had several FTEs (Failures to Extract) with both types in both Colt and Armalite uppers, plus it's very dirty burning. But for fairly cheap blasting ammo, it's tolerable. Buy some, try it and decide. If you buy a bunch to take advantage of the special price and decide it's not for you, it should be easy enough to unload (sell) either here or on AR15.com.

                Comment

                • #9
                  Lurch762
                  Senior Member
                  • Sep 2008
                  • 962

                  The only issue I've had with steel case ammo is it was hard on the finish on my Armalite. The spent shell casings would hit the case deflector right on the edge near the ejection port and it wore thru the black anodizing. Purely cosmetic but you may want to put some electrical tape or something on your case deflector just in case.

                  Comment

                  • #10
                    Beelzy
                    Calguns Addict
                    • Apr 2008
                    • 9225

                    I wouldn't shoot it.

                    It is not good to shoot "dirty" ammo in a gas operated firearm. IMO
                    "I kill things for a living, don't make yourself one of them"

                    Comment

                    Working...
                    UA-8071174-1