Unconfigured Ad Widget

Collapse

Closed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    TexasJackKin
    Senior Member
    • Jul 2014
    • 718

    Something to be concerned with is, if you had one with no power, there is a chance you have one with a double charge. Sometimes with a progressive press, a little bobble can cause that. When something odd happens you need to be very careful.
    Mike M.
    Dayton, NV
    NRA Life member
    Front Sight DG
    CRPA, USPSA, AOPA, EAA, CCW: NV, CA & AZ
    Yes, I'm related to Texas Jack

    Comment

    • #32
      Fishslayer
      In Memoriam
      • Jan 2010
      • 13035

      Originally posted by Toor95991
      I have read alot of different guides.
      I am not an expert dont get me wrong, this is second time ever reloading, the first time was the same way, but the difference was the bullets were deeper seated.

      I already got the bullet out.

      I am just curious to see if I should put the reloaded bullets through the press to seat it maybe 5% further down.

      I used Autocomp for the powder, and 115 Grain Round nose bullets.
      Also I took apart 5 random bullets and weighted the grains.

      I got:
      4.6, 4.7, 4.7, 4.7, 4.8
      What exactly is it you want to hear?
      "He is your friend, your partner, your defender, your dog.
      You are his life, his love, his leader. He will be yours, faithful and true, to the last beat of his heart.
      You owe it to him to be worthy of such devotion."


      Originally Posted by JackRydden224
      I hope Ruger pays the extortion fees for the SR1911. I mean the gun is just as good if not better than a Les Baer.
      Originally posted by redcliff
      A Colt collector shooting Rugers is like Hugh Grant cheating on Elizabeth Hurley with a hooker.

      Comment

      • #33
        pistolmania
        Junior Member
        • Dec 2014
        • 30

        FWIW, I've reloaded 9mm for revolver and have no problem charging with half the charge you're using. They won't cycle a semi-auto, but it's still more than enough to get the bullet out of the barrel. You either missed one, or there was severe contamination.

        If you want to double check your loads, what I've done is weigh each cartridge after you're done. They should all be within a grain of each other (mostly from brass variances).

        Comment

        • #34
          hambam105
          Calguns Addict
          • Jan 2013
          • 7083

          Silly,
          OP, which is it? Lee Loader or Progressive then?
          It's the new & improved Progressive Lee Loader hand press.

          Comment

          • #35
            Squ1dward
            Senior Member
            • May 2014
            • 595

            I got a squib from a factory load about 12 years ago. Doesn't really matter what press you use. It happens. Could be a multitude of different reasons. Sometimes the reloading planets just don't align.

            Squ1d

            Comment

            • #36
              TATER313
              Senior Member
              • Jul 2011
              • 1481

              Seating the bullet deeper will not help, It was that one time you were probably a little distracted, slow down take your time, several times on my lee it would not drop powder using unique, make sure you have a lot of light to visualize powder drop. What you described is a classic squib, if you had a powder it would still kick out the projectile. when I first started reloading years a go I had a couple squibs on my first batches, then I learned not to be distracted, and if I questioned a round I pulled it to be safe.

              Comment

              • #37
                bazineta
                Senior Member
                CGN Contributor
                • Jun 2015
                • 647

                The thing is, if you are using a progressive (hard to tell from the discussion above, frankly), then if you had a light load, your immediate thought should be (a) did I have a powder bridge in the powder drop and (b) do I therefore have a double charge somewhere else.

                A squib isn't fun; a double is, really, really, really not fun.

                When loading rifle rounds, it's typically easy to see if you missed or doubled, because the powder tends to fill the whole case. That's not the case with pistol rounds; a double charge often doesn't look a whole lot different than a normal charge when the powder is a lot less than case capacity.

                If it were me, I'd pull the rest of them.

                And no, COL means absolutely nothing in this case.

                Comment

                • #38
                  Cpetersen
                  Senior Member
                  • Sep 2011
                  • 803

                  Originally posted by stilly
                  Funny, I thought that in the visual, but then it dropped from memory...

                  But then OP said progressive...

                  OP, which is it? Lee Loader or Progressive then?

                  If you loaded this on a progressive- Oh wow... Try to chamber and fire one more and see what happens at the range. If it TOO is a squib, then I would buy about a dozen kinetic pullers on the way home...
                  Lulz
                  I want to live everyday like this...



                  WTB:
                  SVT40 : CZ82 : Bulgarian Makarov : Chinese Makarov : Russian Military Makarov : Manurhin M73

                  Comment

                  • #39
                    edc
                    Junior Member
                    • Mar 2011
                    • 41

                    Ammo got stuck in barrel

                    Pull them don't risk it you can always reuse the components.
                    Last edited by edc; 02-26-2016, 11:48 PM.

                    Comment

                    • #40
                      Mayor McRifle
                      Calguns Addict
                      • Dec 2013
                      • 7797

                      Originally posted by Toor95991
                      hmmmm,

                      Techinally I think your odds are lower.

                      1 in 100 is 1% I agree,

                      However 1 in 100 on the 1ST PULL, is a lot less.

                      Its actually 1 in 10,000 chance to be exact.
                      No, it's 1/100, or 1%. Tanks is correct.
                      Anchors Aweigh

                      sigpic

                      Comment

                      • #41
                        tradecraft
                        Veteran Member
                        • Jul 2008
                        • 4630

                        Originally posted by Toor95991
                        hmmmm,

                        Techinally I think your odds are lower.

                        1 in 100 is 1% I agree,

                        However 1 in 100 on the 1ST PULL, is a lot less.

                        Its actually 1 in 10,000 chance to be exact.
                        Here's to hoping your reloading skills are better than your math ones.
                        Link to my feedback: https://www.calguns.net/forum/market...ser-tradecraft

                        Comment

                        • #42
                          beetle
                          The Clip guy
                          CGN Contributor
                          • May 2009
                          • 1677

                          agree with what everyone has already stated. Hopefully OP will see that there is a common recommendation from experienced reloaders.

                          1) the length has nothing to do with your problem
                          2) you had a round with no powder (or deactivated powder) in it
                          3) be concerned about a round with a double charge
                          4) the odds are 1%

                          Comment

                          • #43
                            fguffey
                            Senior Member
                            • Mar 2010
                            • 1408

                            No casing ejected the slide. And when I pulled the mag off and I slided the slide back, the casing fell out with no bullet.
                            Time proves a reloader is not willing to take the time to eliminate squib loads and the proverbial ‘must have been a double charge’.

                            A shooter at the firing rang was doing ever thing he could to pull the trigger on a Model 66 S&W. He could not pull the hammer back, he could not open roll the cylinder out. Nothing worked; his gun was locked up because he had a bullet stuck between the cylinder and barrel. Another reloader/shooter and I stopped what we were doing to help. We used a small wood dowel and hammer to drive the bullet back into the cylinder and then removed the case with bullet. Immediately he started loading his 357 magnum with more of his reloads.

                            Back to “we stopped to help him” knowing he did not want out help. We asked him about his reloads, scales and RL550 B presses etc and then we asked him why he thought his reloads were safe. He did not know if he had no powder in one round and twice the daily recommended amount in the next one; it was about that time he got all snarky. We offered him all the ammo he could shoot; we offered to stop what we had planned to do that day to help him with his reloading. And then he left.

                            I offered to go home and return with a reloading scale to weigh his reloads even thought he did not know the weight of his components; he did not know the weight of the case, he did not know the weight of the bullet. All he did was go through the motions of reloading.

                            We were at the range because the other reloader informed me I did not know how to load ammo for the Model 1911 45 ACP. What were the results at the end of the day? His ammo did not work in two of my 45 ACPs. His ammo worked in three of his and 4 other 45ACP belonging to other shooters willing to test the ammo.

                            F. Guffey
                            Last edited by fguffey; 02-27-2016, 10:20 AM.

                            Comment

                            • #44
                              hardhead
                              CGN/CGSSA Contributor
                              CGN Contributor
                              • Mar 2014
                              • 406

                              Your load sounds a bit light. I'm loading 124 gn on top of 5.4 gn of auto comp. Not that 4.6 would cause a squib, but my slide barely cycled and it was very dirty at that charge.

                              Sent from my SAMSUNG-SM-G900A using Tapatalk

                              Comment

                              • #45
                                hermosabeach
                                I need a LIFE!!
                                • Feb 2009
                                • 19894

                                OP-

                                If the barrel moved 1/3 the way down the barrel, some pressure had to moved the round.... that is most likely primer ignition....

                                If the primer did not fire, then the bullet would have stayed in the case... or if the OAL was long, it might have stayed in the chamber and 1/8" into the chamber....

                                but 1/3 the way in the barrel sounds like a primer only detonation....




                                If the powder failed to ignite, then it would be everywhere as it would have been pushed, along with the bullet, 1/3 down the barrel...



                                So I agree and think this was one where the powder was missed...
                                Rule 1- ALL GUNS ARE ALWAYS LOADED

                                Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)

                                Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET

                                Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
                                (thanks to Jeff Cooper)

                                Comment

                                Working...
                                UA-8071174-1