Need help with a 9mm setup.

[sammy]

I have loaded 20,000+ rounds with my 650 since I got it about a year ago. All .45ACP and it has been a blast. I am looking into loading 9mm for my G34 and H&K P2000. I am looking at Montana Gold Bullet company and they have several different types of 9mm bullets but don't know what to get. https://secure3.mooseweb.com/montana.../pricelist.tpl

I have had very good luck with their 230g ball and 200g flat nose bullets. They have a minimum of 1000 bullets but I am wondering if any of you reloaders have tried any of their 9mm bullets and what powders and loads you are using. If you load 9mm and don't use them I would like to hear what works well for you. I am only looking at jacketed bullets, no lead. Thanks for all the help, Sammy

[NavyNuke]

I use 7.7 grains of Bluedot behind a 115 grain FMJ RN bullet from Magtech with small pistol primers from CCI and it cycles my Ruger P89 just fine. I have used other manufacturer's bullets in 115 gr, all with success. 7.7 grains of Bluedot is the min load in my Speer reloading manual.

[Blwnbwtie]

i use 4.5gr of bullseye behind any copper plated 115gr RN. 5.0 gr was what the Lee manual listed as min and max, so i just went down 10% and it worked out okay so i just left it at that.

[will227457]

6.2 gn of hs-6 behind any 115 gn round nose fmj, mixed brass cci small pistol primers. I am going to be trying 125 hornady HAP bullets later this week.....will work those up to an acceptable level....