Unconfigured Ad Widget

Collapse

17 Hornet

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • LynnJr
    Calguns Addict
    • Jan 2013
    • 7958

    17 Hornet

    Anyone here loading for the 17 Hornet?
    I just did the paperwork on a CZ527 and all I have is some 20 grain V-Max on order.
    Any pet loads?
    Lynn Dragoman, Jr.
    Southwest Regional Director
    Unlimited Range Shooters Association (URSA)
    www.unlimitedrange.org
    Not a commercial business.
    URSA - Competition starts at 2000 yards!
  • #2
    Capt.Dunsel
    Senior Member
    • May 2011
    • 1199

    Originally posted by LynnJr
    Anyone here loading for the 17 Hornet?
    I just did the paperwork on a CZ527 and all I have is some 20 grain V-Max on order.
    Any pet loads?
    Hornady manual #9 using Alliant 2400 powder the starting charge is 7.8 and the maximum charge is 8.8 grains. Velocity is from 3200 - 3500 fps. COAL = 1.710

    9.3 grains of Lil gun and a 20 grain zmax bullet and I get near 3600 fps and .5 to .75 inch groups at 100 yards

    Regular disclaimer :

    These are safe in mine , use at your own risk , not my responsibility if anything bad goes bad .
    Bweise says "I have to say the situation was not at all helped by 22 yr old former Airsoft douches who kept touting here, "But possession is not illegal!" "

    Fighting on the internet is like being in the special Olympics , everybody wins but your still retarded.

    Librarian " Calguns is not a 'general discussion board".

    Comment

    • #3
      bubbala
      Senior Member
      • Mar 2012
      • 904

      lil gun is the powder. brass has been nonexistent for what seems like years and loaded ammo is hit and miss .but great fun when you shoot it.
      i anneal the brass but the primer pockets will start to loosen pretty quick. guessing 5 or 6 reloads.
      NRA Range Safety Officer pistol and reloading instructor

      https://www.facebook.com/pages/HL-Se...=photos_stream

      Comment

      • #4
        GILMORE619
        Senior Member
        • Mar 2010
        • 560

        I've used lilgun powder with success. Bought a Satern powder funnel to get powder into the case. The 20 grain V max bullets from Hornady work great.
        That CZ you bought is a fine Rifle
        Originally posted by elSquid
        Like Yoda said: "Buy. Or buy not. There is no whine."



        -- Michael
        Originally posted by Pardini
        Obviously, they just threw that shat out there for Calgunners to proof read and expose the loopholes. Now that we have done our part, they will go back and tighten it up and make our fruking airtight.

        Comment

        • #5
          LynnJr
          Calguns Addict
          • Jan 2013
          • 7958

          Thanks Guys
          Lilgun it is. Luckily I already have it on hand.
          Are you guys using 17 Hornet brass or 22 Hornet brass sized down?
          Lynn Dragoman, Jr.
          Southwest Regional Director
          Unlimited Range Shooters Association (URSA)
          www.unlimitedrange.org
          Not a commercial business.
          URSA - Competition starts at 2000 yards!

          Comment

          • #6
            Capt.Dunsel
            Senior Member
            • May 2011
            • 1199

            6 of 1 , half dozen of another. Have had trouble in the past finding brass for both . Use what you can find , they will both work .

            TC Contenders are fun .
            Bweise says "I have to say the situation was not at all helped by 22 yr old former Airsoft douches who kept touting here, "But possession is not illegal!" "

            Fighting on the internet is like being in the special Olympics , everybody wins but your still retarded.

            Librarian " Calguns is not a 'general discussion board".

            Comment

            • #7
              GILMORE619
              Senior Member
              • Mar 2010
              • 560

              I purchased 17 hornet brass and bought some factory ammo. Factory ammo was just a few cents more per round than buying factory brass
              Originally posted by elSquid
              Like Yoda said: "Buy. Or buy not. There is no whine."



              -- Michael
              Originally posted by Pardini
              Obviously, they just threw that shat out there for Calgunners to proof read and expose the loopholes. Now that we have done our part, they will go back and tighten it up and make our fruking airtight.

              Comment

              Working...
              UA-8071174-1