Unconfigured Ad Widget

Collapse

Prvi Partizan Load Data?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hinnerk
    Senior Member
    • May 2015
    • 779

    Prvi Partizan Load Data?

    Just getting started in reloading. As it happens, my interest is initially in some not so common rifle ammo; 8x57 and 7.65x53 Mauser. Prvi Partizan makes reasonably priced bullets for these calibers but, as far as I can tell, there are no published load data for their components. Are there?

    I have Lyman's manual and found some load data for those cases on the Hodgdon site and elsewhere, but the Prvi Partizan bullets will take some inexact matching (e.g. there is load data for same weight bullet as round nose but the Prvi Partizan are spitzer boat tail). What is the best way to proceed in such cases?

    Most of my brass is once fired PPU. I have .311 bullets 150 gr FMJBT from PPU and 174 gr HPBT MatchKing from Sierra. For the 8x57 I have .323 bullets in 198 gr FMJBT from PPU and some 220 gr GameKing from Sierra.

    Press is Lyman Crusher II. Dies are RCBS (X-die in 8x57).
  • #2
    OpenSightsOnly
    Senior Member
    • Sep 2009
    • 1557

    Yep, I have yet to see reload data for PPU but it does not matter to me (I use PPU brass for 8mm and 7.5 Swiss) since I have three reloading manuals and I use IMR 4064 and Sierra Matchkings for 8mm and 30 cal.

    For 8mm, I used the data from the Sierra reloading manual for the 200 gr Sierra matchking. You can checkout the load data using the IMR/Hodgdon website.

    I don't load 8mm nowadays since Yugo M76 8mm ammo is cheaper than handloading.

    Comment

    • #3
      Full Clip
      I need a LIFE!!
      • Dec 2006
      • 10266

      Just match weights and work way up from minimum loads.

      Comment

      Working...
      UA-8071174-1