357 Max brass

[KTM 200]

Hi anyone know where I can find some 357 Max brass. Its seems like its getting really hard to find. Thanks Lynn

[G-Man WC]

http://www.midwayusa.com/product/1601729225/remington-reloading-brass-357-maximum

[KTM 200]

Thanks I have been getting the 180 grain bullets from there. But have to wait forever for the brass.

[6mmintl]

I have some primed brass, maybe 50 pcs, if in bay area contact me

[pdq_wizzard]

I have some primed brass, maybe 50 pcs, if in bay area contact me

just a heads up you can ship primed brass with no hazmat

[Whiterabbit]

it always surprises me when helpful folks post links to the product you want but it has been out of stock at that website for long periods of time. Same thing happened to me recently.

KTM, I cannot help you anymore, but I suggest you keep tabs on the starline website and be ready to move. In the meantime, put a feeler on the cast boolit website and keep tabs on the for sale section there. That will be our best bet.

Maybe on the greybeard forum too, but I suspect less so there.

['ol shooter]

When I went looking for it a few months back, I found it at Grafs, which is out now. The relevant point is that as far as I can figure, Remington and Jamison are the only producers of this brass right now. I bought the Jamison, and am very impressed with the quality. I did not see any reference to it on Starline Brass, which I also use a lot of in other calibers.

[Getssum96]

One listing on gunbroker.

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=487735848

[KTM 200]

Last time I got the brass was 4 years ago. And it was remington brass. I was able to get 300 rounds of the brass. I have finally been able to get the sierra 180 grain bullets and finally some h110 powder. Thanks for all your help on here. ? have any of you ever shot the 7 and a half inch barrel ruger 357 max. Does it kick a lot. I have the 10 and a half inch barrel Blackhawk.

[KTM 200]

Thanks just looked on Gun Broker. I would of never thought of that

[Witch Hunter]

Contact mikebellm.com He occasionally gets max brass and bullets. He stated on his website that Remington is supposed to make a run this year.

[Capt.Dunsel]

Contact mikebellm.com He occasionally gets max brass and bullets. He stated on his website that Remington is supposed to make a run this year.

Speaking of Bellm.com http://www.bellmtcs.com/store/index.php?cid=658

He says you can load to max in mag brass , you just seat the bullet out farther to keep case capacity the same. Guess that would do in a pinch if you can't find max brass.

KTM 200 "have any of you ever shot the 7 and a half inch barrel ruger 357 max. Does it kick a lot. I have the 10 and a half inch barrel Blackhawk. "

I shoot the Max out of a Super 14 TC Contender , needless to say it is a "blast" when loaded to it capability in Contender , Blackhawks are as strong so I have heard .