Unconfigured Ad Widget

Collapse

Lee Quick Trim Vs Value Trim

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • energizer
    Senior Member
    • Jun 2010
    • 592

    Lee Quick Trim Vs Value Trim

    What is the basic difference between Lee Quick Trim and Lee Value Trim?

    Is there any difference between the metals of construction? By looking at pictures it seems that Quick Trim has a steel body. It is unclear if Value Trim has body other than steel.
  • #2
    someoneeasy
    Senior Member
    • Feb 2011
    • 2372

    The value trim doesn't chamfer and debur

    Comment

    • #3
      someoneeasy
      Senior Member
      • Feb 2011
      • 2372

      Have you looked at the powered version?

      I modified my quick trim by adding a little dc motor, then they released the powered version. I'm probably going to order it soon to use with a powered screw driver

      Comment

      • #4
        energizer
        Senior Member
        • Jun 2010
        • 592

        Originally posted by someoneeasy
        The value trim doesn't chamfer and debur
        Originally posted by someoneeasy
        Have you looked at the powered version?

        I modified my quick trim by adding a little dc motor, then they released the powered version. I'm probably going to order it soon to use with a powered screw driver
        Thanks for the information.

        It would be nice to see your DC motor setup pictures / video.

        Comment

        • #5
          Bumslie
          CGN/CGSSA Contributor
          CGN Contributor
          • Oct 2011
          • 5358

          I have the deluxe quick trim. What cartridge do you want to use it for?
          NRA Life Member
          WARNING: This post may contain material offensive to those who lack wit, humor, and common sense. Some overly sensitive "men" will be offended.
          Originally posted by ivanimal
          I love you! (some Homo)
          Originally posted by ivanimal
          I am a Gay muslim sometimes.
          Originally posted by Kestryll
          OP you are an uninformed tool.
          Go Broncos!
          Go Kings Go!

          Comment

          • #6
            someoneeasy
            Senior Member
            • Feb 2011
            • 2372

            Originally posted by energizer
            Thanks for the information.

            It would be nice to see your DC motor setup pictures / video.
            I'll try to get a picture up for you tomorrow when I get a chance, but basically, I ordered a dc motor with a 6mm shaft along with a 6mm to 14mm coupler.

            I then cut and ground off the handle so that I could attach the coupler. In doing so, I was able to keep the micro adjustment.

            Sorry if that confused you more, the pictures will help when I get a chance to post them.

            Comment

            • #7
              energizer
              Senior Member
              • Jun 2010
              • 592

              Originally posted by Bumslie
              I have the deluxe quick trim. What cartridge do you want to use it for?
              Not looking at any particular cartridge. Just wanted to find out if there is any value buying it in a kit.

              Comment

              • #8
                energizer
                Senior Member
                • Jun 2010
                • 592

                Originally posted by someoneeasy
                I'll try to get a picture up for you tomorrow when I get a chance, but basically, I ordered a dc motor with a 6mm shaft along with a 6mm to 14mm coupler.

                I then cut and ground off the handle so that I could attach the coupler. In doing so, I was able to keep the micro adjustment.

                Sorry if that confused you more, the pictures will help when I get a chance to post them.
                Pictures will be helpful for fellow calgunners.

                Comment

                • #9
                  Bumslie
                  CGN/CGSSA Contributor
                  CGN Contributor
                  • Oct 2011
                  • 5358

                  Originally posted by energizer
                  Not looking at any particular cartridge. Just wanted to find out if there is any value buying it in a kit.
                  I have a 223, 30-06 and 9mm mak die

                  If you want to borrow it and try it out for a week or two, pm me your address and I'll send it out to you.
                  NRA Life Member
                  WARNING: This post may contain material offensive to those who lack wit, humor, and common sense. Some overly sensitive "men" will be offended.
                  Originally posted by ivanimal
                  I love you! (some Homo)
                  Originally posted by ivanimal
                  I am a Gay muslim sometimes.
                  Originally posted by Kestryll
                  OP you are an uninformed tool.
                  Go Broncos!
                  Go Kings Go!

                  Comment

                  • #10
                    energizer
                    Senior Member
                    • Jun 2010
                    • 592

                    Thanks

                    Originally posted by Bumslie
                    I have a 223, 30-06 and 9mm mak die

                    If you want to borrow it and try it out for a week or two, pm me your address and I'll send it out to you.
                    Thanks for the generous offer. Currently I'm just trying to find the worth. I will definitely take your offer once I'm ready.

                    My current project is to convert few hundred of 9x19 cases to 9x18. I currently use Lee case trimmer for that.

                    Thanks again.

                    Comment

                    • #11
                      someoneeasy
                      Senior Member
                      • Feb 2011
                      • 2372

                      sorry for the long wait, but here are the pictures. Definitely not the greatest, but I wanted to snap a few quick ones for you to see.





                      By grinding off the handle, I'm able to maintain the adjustment knob.




                      I hope it gives you somewhat of an idea of what I did. I definitely need to redo the switch though. Probably need to use a different switch or at least extend out the wires.








                      I hope it gives you somewhat of an idea of what I did. I definitely need to redo the switch though. Probably need to use a different switch or at least extend out the wires.
                      Last edited by someoneeasy; 03-01-2015, 10:09 PM.

                      Comment

                      • #12
                        b1gdave32
                        Senior Member
                        • Dec 2012
                        • 554

                        Energizer, I have a Lee value trim new never used that u can have if u want it

                        Comment

                        Working...
                        UA-8071174-1