X-tream Bullets,9mm Flat Point Load Data

[traveler1952]

Excuse me for asking but I'm a real newbie at reloading
I have some 9mm 124 gr flat point , plated X-tream bullets I'm tying to find load data.
Mostly I need OAL as I think I have the powder charge down as I'm using
125 gr at lowest amount.
Using 700X

Thanks in advance.

[uechikid]

Here is what the Xtream Bullets web sight says. It would also be helpful to know what powder you are using.

Load Info

Our Copper Plated Bullets can be run at mid-range jacketed velocities or higher end lead velocities. We recommend keeping velocities to less than 1500 FPS (Feet Per Second) and using only a light taper crimp

Any velocities over 1200 FPS we recommend either our Heavy Plate Concave Base or Hollow Point products for superior accuracy. We recommend keeping velocities to less than 1500 FPS (Feet Per Second) and using only a light taper crimp

[rm1911]

Do the barrel drop test and mag for test. That's a great gauge for OAL. Calipers are very helpful but the best tool is the gun you shoot them out of. If it drops easily and in and out and fits good in the mag, you should be fine. Biggest problem with OAL is too short. Good way to see a pressure problem.

[rogerl830]

Looks like he wrote 700X powder to me


Sent from my iPhone using Tapatalk

[Loiterer]

Try Hodgdon web site. I think you will find specs there.
I havent used 700x for some time.

[uechikid]

Here is what I could find at the Hodgdon web site. Not an exact match for those bullets but this should give you a good place to start.
And here is a link to that site.

http://www.hodgdonreloading.com

[Trapper]

I load them to 1.155"