Unconfigured Ad Widget

Collapse

Overclock question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Nick1236
    Veteran Member
    • Mar 2010
    • 3843

    Overclock question

    Alright, last night I managed to overclock my AMD II x4 955 black edition to 4Ghz. Ran an 8 hour prime95 blend test and it barely broke 50c, no errors.

    MSI 890FXA-GD65 board.
    multiplier @ 19.5
    Northbridge link @ 205
    vcore @ 1.4375v
    Ram running @ 686Mhz 7-7-7-21

    did I get extremely lucky here? I was reading online and most poeple can't break 3.8Ghz without going to 1.5v. I will run another prime95 test again tonight and then validate with cpuid. Does this seem right?
    sigpic

    Originally posted by dirtykoala
    dont have a gun, let crack head break your window and super man drop kick you
    Originally posted by compulsivegunbuyer
    I grab my zipper and ask if he wants to make a little extra cash
  • #2
    bigbearbear
    Calguns Addict
    • Jun 2011
    • 5378

    Given that the stock frequency of the CPU is 3.2Ghz, 4Ghz overclock is pretty modest I think. If you read the reviews from customers at newegg.com, some people are posting that they can get to 4Ghz with aftermarket coolers and 3.8Ghz if using stock cooler.

    Comment

    • #3
      Nick1236
      Veteran Member
      • Mar 2010
      • 3843

      yeah I read the reviews as well. I have aftermarket cooling but i'm more wondering about the voltage. I'm only at 1.4375 and most poeple have to run at 1.5-1.55 to get stable 4Ghz.
      sigpic

      Originally posted by dirtykoala
      dont have a gun, let crack head break your window and super man drop kick you
      Originally posted by compulsivegunbuyer
      I grab my zipper and ask if he wants to make a little extra cash

      Comment

      • #4
        msound
        Junior Member
        • Nov 2011
        • 12

        Every chip is different sometimes you get lucky and get one that is able to overclock better than another one. I would not worry about it if it's stable at full burn. More volts means more heat so the lower you can keep the volts the better.

        Comment

        Working...
        UA-8071174-1