Unconfigured Ad Widget

Collapse

security DVR/NVR suggestions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ke6guj
    Moderator
    CGN Contributor - Lifetime
    • Nov 2003
    • 23725

    security DVR/NVR suggestions

    looking to see what you guys are using for security DVRs/NVRs. We recently installed some IP cameras and temporarily set up an NVR with the free software that the manufacturer of the cameras offers. It is a bare-bones software program running on a desktop so we need to get this moved onto server-class hardware with a better software program. I'm currently at 20 cameras and will probably be somewhere around 40 when done with the installation.

    The installers quoted out a Nuuo Titan, but I am looking into other options, QNAP, Honeywell, etc

    any suggestions for preferences or brands to avoid would be appreciated.
    Jack



    Do you want an AOW or C&R SBS/SBR in CA?

    No posts of mine are to be construed as legal advice, which can only be given by a lawyer.
  • #2
    damjo
    Junior Member
    • Nov 2007
    • 68

    I have been using the free version of Milestone. I like it. We have access to a enterprise system that has quite a few camera and it's pretty impressive.
    Jons Guns - Ceres, Ca
    jon@jonsguns.biz
    http://www.jonsguns.biz

    sigpic
    NRA Life Member

    Comment

    • #3
      five.five-six
      CGN Contributor
      • May 2006
      • 34947

      How many MP cameras? (40) 1mp cameras is one thing, (40) 4mp cameras is a whole different animal.

      Comment

      • #4
        five.five-six
        CGN Contributor
        • May 2006
        • 34947

        Direct to your question, I have had success with beefed up workstations, i7 +3Ghz, 16GB+ ram, RAID 5, that sort of thing. it depends if the NVR manufacture supports their software on your box.

        Comment

        • #5
          five.five-six
          CGN Contributor
          • May 2006
          • 34947

          Direct to your question, I have had success with beefed up workstations, i7 +3Ghz, 16GB+ ram, RAID 5, that sort of thing. it depends if the NVR manufacture supports their software on your box.

          Comment

          • #6
            five.five-six
            CGN Contributor
            • May 2006
            • 34947

            Originally posted by ke6guj
            looking to see what you guys are using for security DVRs/NVRs. We recently installed some IP cameras and temporarily set up an NVR with the free software that the manufacturer of the cameras offers. It is a bare-bones software program running on a desktop so we need to get this moved onto server-class hardware with a better software program. I'm currently at 20 cameras and will probably be somewhere around 40 when done with the installation.

            The installers quoted out a Nuuo Titan, but I am looking into other options, QNAP, Honeywell, etc

            any suggestions for preferences or brands to avoid would be appreciated.
            Direct to your question, I have had success with beefed up workstations, i7 +3Ghz, 16GB+ ram, RAID 5, that sort of thing. it depends if the NVR manufacture supports their software on your box.

            Comment

            • #7
              hdvss
              Junior Member
              • Apr 2011
              • 41

              If your end-state is 40 megapixel cams, I would probably run two "servers". Most NVR SW will have recommended specs for camera counts. It's a good idea to always run above what they spec for hardware. NICs and storage subsystem selection are also critical with high megapixel camera counts.

              As 556 stated, good workstations should suffice... doesn't have to be "server" class, unless the IT policies demand it.

              Take a look at Luxriot, exacqVision, and Milestone for NVR SW. Exacq and Milestone are very popular in large environments. Luxriot is pretty solid with a lot of good features for the pricing structure.
              Last edited by hdvss; 12-19-2012, 4:04 PM.

              Comment

              • #8
                ke6guj
                Moderator
                CGN Contributor - Lifetime
                • Nov 2003
                • 23725

                we're mainly using 1MP cameras with just a couple 2MP cameras in certain spots.

                I'll look into those suggestions to see if doing an SW setup, or if we should end up just going with an pre-built setup.
                Jack



                Do you want an AOW or C&R SBS/SBR in CA?

                No posts of mine are to be construed as legal advice, which can only be given by a lawyer.

                Comment

                • #9
                  M1Kev
                  Member
                  • Oct 2010
                  • 298

                  Where are you located? My company does this kind of stuff. Right now we sell Exacq, they have everything from desktop class all the way up to enterprise boxes. Also, you can just purchase the software and run it on a server you already have. We have had a lot of positive responses. Also, Samsung is upping their product lines after ISC west this year with some pretty high end stuff. Shoot me a PM if you would like to discuss further. We are out of the SF Bay Area. I am always down to help out a fellow Calgunner if I can.

                  Comment

                  • #10
                    five.five-six
                    CGN Contributor
                    • May 2006
                    • 34947

                    Originally posted by ke6guj
                    we're mainly using 1MP cameras with just a couple 2MP cameras in certain spots.

                    I'll look into those suggestions to see if doing an SW setup, or if we should end up just going with an pre-built setup.
                    A trick that I use is to put multiple NICs on the " server' and split up the load on the switches. I try to keep it under 16 cameras per switch. Only use 802.3af switches. I also use separate physical network for the cameras with a different subnet than the LAN.

                    Sent from my SAMSUNG-SGH-I897 using Tapatalk 2

                    Comment

                    Working...
                    UA-8071174-1