Unconfigured Ad Widget

Collapse

Weird DHCP issue with windows server 2003

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Booshanky
    In Memoriam
    • Dec 2007
    • 7822

    Weird DHCP issue with windows server 2003

    Holla!

    So I've got this server at a clients office and I've got some weird network issues.

    I inherited this client from someone else and it's not really set up the way I like things to be set up, and I got them fairly recently so I haven't had a whole lot of time to redo what I don't like.

    Anyhoo, I put in a wireless access point for them a while back and now all their clients are using it. Here's the problem.

    Basically a computer can connect just fine either wired or wireless, and it will get them local network acces, but no internet access. I can log into other computers, check the GUI for the router, but no google or yahoo.

    Now, I initially thought that it was a problem with DHCP because it was only set up to hand out 20 IP's. 192.168.10.20-40. Now, when you connect wirelessly or via a cable, it will hand you an IP, correct gateway, DNS, all that. But it won't connect to the internet.

    So I thought that was the problem and just increased the number of IP's from 20-50. But still no go.

    Anyway, this is a weird one for me. Even if I statically assign network info to the computers, they still won't connect.

    Now, here's the really strange thing.

    If they've connected successfully before, they'll connect again. But nothing really works right. For example, I took a laptop that wasn't connecting right, deleted old DHCP IP's that had been handed out, and then assigned it an ip, it would work. But any new comp after that won't connect right. It's weird, it's like it will only work if the IP's are below 192.168.10.40. Anything above that doesn't seem to work.

    I'm not positive that it's a DHCP issue since it is handing out the correct network info, but that's the only thing I can guess.

    Any idea what I should try?
    "Please use the comments to demonstrate your own ignorance, unfamiliarity with empirical data, ability to repeat discredited memes, and lack of respect for scientific knowledge. Also, be sure to create straw men and argue against things I have neither said nor even implied. Any irrelevancies you can mention will also be appreciated. Lastly, kindly forgo all civility in your discourse . . you are, after all, anonymous."
    -Barry Ritholtz


    Help be a better advocate for the 2nd Amendment here.
  • #2
    smird
    CGN/CGSSA Contributor
    CGN Contributor
    • May 2009
    • 8319

    What kind of internet connection do they have. If it's DSL can you plug a PC directly into the modem to see if the internet works on the other side of the router?

    Comment

    • #3
      GrizzlyGuy
      Gun Runner to The Stars
      CGN Contributor - Lifetime
      • May 2009
      • 5468

      In the WAP configuration pages, there should be a section where you tell it about the outbound (WAN) internet connection. Things like IP Address, IP Subnet Mask, Gateway IP Address and Primary/Secondary DNS. Those addresses and masks are specified by the internet service provider (AT&T, whoever). Are you sure you have those set correctly?

      From a computer that is wired to the WAP, have you tried pinging a TCP/IP address out on the Internet? For example, I just pinged Google.com and the replies came from 74.125.93.99. Try pinging that address, vs. pinging Google.com (so as to eliminate DNS from the equation).
      Gun law complexity got you down? Get the FAQs, Jack!

      sigpic

      Comment

      • #4
        Booshanky
        In Memoriam
        • Dec 2007
        • 7822

        Originally posted by smird
        What kind of internet connection do they have. If it's DSL can you plug a PC directly into the modem to see if the internet works on the other side of the router?
        Yeah, I can, but I know there's an internet connection that works. I'm connected to it on my laptop.

        That's not really the problem. While this whole DHCP thing is screwing up these new macbooks that I'm trying to get on the network, other computers connect just fine.
        "Please use the comments to demonstrate your own ignorance, unfamiliarity with empirical data, ability to repeat discredited memes, and lack of respect for scientific knowledge. Also, be sure to create straw men and argue against things I have neither said nor even implied. Any irrelevancies you can mention will also be appreciated. Lastly, kindly forgo all civility in your discourse . . you are, after all, anonymous."
        -Barry Ritholtz


        Help be a better advocate for the 2nd Amendment here.

        Comment

        • #5
          Booshanky
          In Memoriam
          • Dec 2007
          • 7822

          Originally posted by GrizzlyGuy
          In the WAP configuration pages, there should be a section where you tell it about the outbound (WAN) internet connection. Things like IP Address, IP Subnet Mask, Gateway IP Address and Primary/Secondary DNS. Those addresses and masks are specified by the internet service provider (AT&T, whoever). Are you sure you have those set correctly?

          From a computer that is wired to the WAP, have you tried pinging a TCP/IP address out on the Internet? For example, I just pinged Google.com and the replies came from 74.125.93.99. Try pinging that address, vs. pinging Google.com (so as to eliminate DNS from the equation).
          Yeah, I tried that. It's not a DNS issue. I tried a bunch of DNS like opendns, googles DNS, all that stuff and still a no go. Even tried accessing like you said by going directly to the IP, no go.

          Bizarre issue huh?

          And just FYI, the WAP is just a wrt54g running DD-WRT. It's just set up to be a dumb WAP. All the DHCP, DNS, everything is handled by the server, not the WAP.

          Also, it's not really a wireless issue because it happens whether it's wired or wireless.
          "Please use the comments to demonstrate your own ignorance, unfamiliarity with empirical data, ability to repeat discredited memes, and lack of respect for scientific knowledge. Also, be sure to create straw men and argue against things I have neither said nor even implied. Any irrelevancies you can mention will also be appreciated. Lastly, kindly forgo all civility in your discourse . . you are, after all, anonymous."
          -Barry Ritholtz


          Help be a better advocate for the 2nd Amendment here.

          Comment

          • #6
            vmwerks
            Norcal Cyclist
            CGN Contributor - Lifetime
            • Jun 2009
            • 3502

            Where does the tracert die? Access outside your network is controlled by your local router. Beyond an incorrect gateway being assigned there could be a firewall rule blocking Internet access.

            Do PC's get access and Macbooks do not?

            Comment

            • #7
              ke6guj
              Moderator
              CGN Contributor - Lifetime
              • Nov 2003
              • 23725

              I'd do some trace routing to see if you see anything wierd going on. compare the working clients with the non-workingt clients.

              Have you tried restarting the router? Anything wierd in the router settings?

              edit: guess I should have refreshed before I posted
              Jack



              Do you want an AOW or C&R SBS/SBR in CA?

              No posts of mine are to be construed as legal advice, which can only be given by a lawyer.

              Comment

              • #8
                Booshanky
                In Memoriam
                • Dec 2007
                • 7822

                Originally posted by vmwerks
                Where does the tracert die? Access outside your network is controlled by your local router. Beyond an incorrect gateway being assigned there could be a firewall rule blocking Internet access.

                Do PC's get access and Macbooks do not?
                Ah! The firewall! That's one thing I didn't check. Lemme try that.

                BTW, the DHCP isn't being handled by a separate routing device, that's all done on the server running SBS 2003.
                "Please use the comments to demonstrate your own ignorance, unfamiliarity with empirical data, ability to repeat discredited memes, and lack of respect for scientific knowledge. Also, be sure to create straw men and argue against things I have neither said nor even implied. Any irrelevancies you can mention will also be appreciated. Lastly, kindly forgo all civility in your discourse . . you are, after all, anonymous."
                -Barry Ritholtz


                Help be a better advocate for the 2nd Amendment here.

                Comment

                • #9
                  vmwerks
                  Norcal Cyclist
                  CGN Contributor - Lifetime
                  • Jun 2009
                  • 3502

                  Originally posted by Booshanky
                  Ah! The firewall! That's one thing I didn't check. Lemme try that.

                  BTW, the DHCP isn't being handled by a separate routing device, that's all done on the server running SBS 2003.
                  DHCP is rarely the issue unless it is handing out the wrong gateway. Also if the firewall rules allow only a specific subnet outbound and the server is handing out address's on a different subnet you will have an issue. Typically the default outbound HTTP rule is any ----> any

                  Turn off all rules and disco any mahcine other than your test machine...

                  Comment

                  • #10
                    Booshanky
                    In Memoriam
                    • Dec 2007
                    • 7822

                    Hrm, it's not letting me check the firewall because I've got RRAS enabled on the server. I'm going to fiddle with it more tomorrow though. Thanks for the help so far!

                    -Mark
                    "Please use the comments to demonstrate your own ignorance, unfamiliarity with empirical data, ability to repeat discredited memes, and lack of respect for scientific knowledge. Also, be sure to create straw men and argue against things I have neither said nor even implied. Any irrelevancies you can mention will also be appreciated. Lastly, kindly forgo all civility in your discourse . . you are, after all, anonymous."
                    -Barry Ritholtz


                    Help be a better advocate for the 2nd Amendment here.

                    Comment

                    • #11
                      vmwerks
                      Norcal Cyclist
                      CGN Contributor - Lifetime
                      • Jun 2009
                      • 3502

                      Originally posted by Booshanky
                      Hrm, it's not letting me check the firewall because I've got RRAS enabled on the server. I'm going to fiddle with it more tomorrow though. Thanks for the help so far!

                      -Mark
                      No problemo - PM me if you want hands off phone help.

                      Comment

                      • #12
                        sfwdiy
                        Senior Member
                        • Feb 2008
                        • 2146

                        I'm betting firewall. Sounds like only part of the subnet is allowed in and out. Give us an update when you get it straightened out, I'm curious.

                        --B
                        Need data recovery? CLICK HERE for a discount on your next recovery from DriveSavers!

                        Comment

                        Working...
                        UA-8071174-1