Unconfigured Ad Widget

Collapse

SUPER STRONG WIRELESS ROUTER... suggestions?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • thefinger
    Senior Member
    • Sep 2006
    • 1651

    SUPER STRONG WIRELESS ROUTER... suggestions?

    I need a wireless router for my home network. I need something that can transmit from my computer room in the house to my workstation in the workshop outside. I've always had problem with getting a good connection out there. Its about 50 feet from my router to computer.

    Can anyone suggest a good set-up? I'd like to get a new router with some sort of booster (maybe directional?), and also a great receiver for my desktop machine in the workshop.

    Any specific models I should consider? Halp!
  • #2
    gravedigger
    Banned
    • Jul 2008
    • 2015

    50 feet? Why not just run a LAN cable to a hub or a switch in your workshop? Either in the air from pole to pole with a supporting 1/16" steel cable, or underground through a length of PVC pipe? Seems to be a really short distance to warrant an expensive wireless setup. The Linksys routers with the extended Db gain antennas should easily reach that distance. I'd be careful about broadcasting your router from your home. it means that a passerby can link into it with a laptop or an iPhone or whatever, and if it isn't completely secure, you're opening up your home computers to strangers. Take a Saturday afternoon and run a cable. You'll be glad you did!

    Comment

    • #3
      sd_shooter
      I need a LIFE!!
      • Dec 2008
      • 14340

      My Linksys wireless G router works fine - I can watch netflix movies even hanging out in the back yard or in the garage.

      'G' has greater range than 'B' and better security as well.

      Comment

      • #4
        KALIDAWG8996
        Senior Member
        • Nov 2009
        • 705

        You can use a wall plug in ethernet set up. You can use these wall jack type devices that have an ethernet plug on the set(you need 2).

        1) you plug in one near your router and plug it in to an electrical socket.

        2)you plug the other in your work shop and plug it in and VOILA!

        You can find them on ebay for roughly 80-100 bucks. They're called plug-in ethernet adapters.

        another thing you can use is a repeater for your Wireless set up you can probably find at geeks.com

        Comment

        • #5
          ocabj
          Calguns Addict
          • Oct 2005
          • 7924

          You can buy a high-gain antenna and get the appropriate connector to plug it into your respective wifi access point.

          Example:
          WiFi Omni Directional Antenna - 15dB gain - RadioLabs powerful commercial series, thin-wall fiberglass omni antenna, radiates a signal in a 360 degree pattern, allowing the maximum signal transmitted directly out the side of the antenna, sending the signal the maximum distance possible. This incredi


          Security? I don't use WEP or WPA at home. I simply turn off SSID broadcasting and setup MAC binding. I handle all encryption at the application layer.
          Last edited by ocabj; 04-01-2010, 8:13 AM.

          Distinguished Rifleman #1924
          NRA Certified Instructor (Rifle and Metallic Cartridge Reloading) and RSO
          NRL22 Match Director at WEGC

          https://www.ocabj.net

          Comment

          • #6
            limitdown
            Member
            • Jan 2010
            • 466

            I bought a Cisco range-extender N to replace my Netgear G router thinking that it would increase signal strength.
            Disappointed.
            No increase in range. Speed the same.
            Check to see if you have a slot in the back of your existing router in which you can plug in an antenna. Then get an antenna from newegg.com
            Why do we keep letting history repeat itself?....

            "A retreat by the United States from Vietnam would be a Communist victory, a victory of massive proportions and would lead to World War III"
            - Richard Nixon, May 1966:

            Comment

            • #7
              ldivinag
              In Memoriam
              • Oct 2005
              • 4858

              leo d.

              Comment

              • #8
                JDay
                I need a LIFE!!
                • Nov 2008
                • 19393

                Get a Linksys WRT54GL, flash it with DD-WRT and get the high gain antenna kit for it. You'll get a ton of range. You can even turn the TX power up in the DD-WRT settings. Another thing you should do is make sure the wireless channel is set to auto, this way it will choose the channel with the least interference. This is important if there's a lot of wireless routers in your area or a cell tower nearby.
                Oppressors can tyrannize only when they achieve a standing army, an enslaved press, and a disarmed populace. -- James Madison

                The Constitution shall never be construed to authorize Congress to prevent the people of the United States, who are peaceable citizens, from keeping their own arms. -- Samuel Adams, Debates and Proceedings in the Convention of the Commonwealth of Massachusetts, 86-87 (Pearce and Hale, eds., Boston, 1850)

                Comment

                • #9
                  whobob
                  OG on Calguns
                  CGN Contributor - Lifetime
                  • Nov 2006
                  • 968

                  I use a repeater.
                  sigpic

                  Comment

                  • #10
                    hamsalad
                    Member
                    • Oct 2007
                    • 371

                    Originally posted by JDay
                    Get a Linksys WRT54GL, flash it with DD-WRT and get the high gain antenna kit for it. You'll get a ton of range. You can even turn the TX power up in the DD-WRT settings. Another thing you should do is make sure the wireless channel is set to auto, this way it will choose the channel with the least interference. This is important if there's a lot of wireless routers in your area or a cell tower nearby.
                    I second this setup as it mirrors mine. Rock solid setup.

                    Comment

                    • #11
                      hikari
                      Junior Member
                      • May 2005
                      • 89

                      Ok so here is the thing.

                      First i would say if you can wire it wire it.
                      Second if you are going wireless go with 802.11n make sure both sides support it.

                      The question is what frequency you want to go with either 2.4hz or 5hz.
                      Now lower the frequency number the more penetration the wave has.
                      So you will be able to go further with 2.4hz but there is alot of house hold things that run on 2.4hz like microwave's phones etc... so there is more noise in the 2.4 spectrum

                      If you move to 5hz realm there is less noise and more channels.

                      Now if you ask me what i use.
                      I have a newer Apple extreeme the reason behind it is that you can broadcast but sepctriums and have both networks setup
                      So for distance runs like my yard i can switch to that but other things in my house i can play Blue ray rips with out stutter.

                      Apple extreeme was the only router out that that could do this but now i think there are one or two other that can do it.
                      If you decided to go this route make sure it say simultaneous bands

                      Comment

                      • #12
                        Satex
                        CGN/CGSSA Contributor
                        CGN Contributor
                        • Feb 2006
                        • 3501

                        Go with "n" technology, all of them have MIMO technology which helps extend range. Also, place the router in a good location in the home, away from objects, and if possible head high.

                        Comment

                        • #13
                          JDay
                          I need a LIFE!!
                          • Nov 2008
                          • 19393

                          Originally posted by hikari
                          The question is what frequency you want to go with either 2.4hz or 5hz.
                          Now lower the frequency number the more penetration the wave has.
                          So you will be able to go further with 2.4hz but there is alot of house hold things that run on 2.4hz like microwave's phones etc... so there is more noise in the 2.4 spectrum
                          Wifi doesn't operate in either of those frequencies. It operates in GHz not Hz. 802.11n is 5GHz so it will not travel as far as 802.11g through walls. Microwaves and phones aren't a problem if you don't put the router right next to the microwave or the telephone base station. Its also a good idea to set the wireless channel to auto.
                          Oppressors can tyrannize only when they achieve a standing army, an enslaved press, and a disarmed populace. -- James Madison

                          The Constitution shall never be construed to authorize Congress to prevent the people of the United States, who are peaceable citizens, from keeping their own arms. -- Samuel Adams, Debates and Proceedings in the Convention of the Commonwealth of Massachusetts, 86-87 (Pearce and Hale, eds., Boston, 1850)

                          Comment

                          • #14
                            odysseus
                            I need a LIFE!!
                            • Dec 2005
                            • 10407

                            I am surprised no one has recommended it, but you should try to examine gain strength using one of the many free wifi signal detection utilities out there to at least troubleshoot the topology issue. 50 feet should not be too much of a constraint unless there are some real barriers to the building and items in it causing high attenuation (think metal siding as a big example).

                            Sure a directional antenna would normally help, but there seems to be some inefficiency here for normal wifi. Normally if you can't line of sight between windows well to help, I would recommend an outside antenna.
                            "Just leave me alone, I know what to do." - Kimi Raikkonen

                            The moment the idea is admitted into society, that property is not as sacred as the laws of God, and that there is not a force of law and public justice to protect it, anarchy and tyranny commence.' and that `Property is surely a right of mankind as real as liberty.'
                            - John Adams

                            http://www.usdebtclock.org/

                            Comment

                            • #15
                              igorts
                              Senior Member
                              • Jan 2007
                              • 1562

                              I think i have 20 Miles radius antenna by cisco somewhere...
                              if you cant find an amplifier you might become a provider in your area..
                              Lifetime NRA Member

                              Comment

                              Working...
                              UA-8071174-1